Sterilization of health care products — Chemical indicators — Part 4: Type 2 indicator systems as an...
ISO 11140-4:2007 specifies the performance for a Class 2 indicator to be used as an alternative to the Bowie and Dick-type test for steam sterilizers for wrapped health care goods (instruments, etc. and porous loads).
An indicator complying with ISO 11140-4:2007 incorporates a specified material which is used as a test load. This test load may, or may not, be re-usable. ISO 11140-4:2007 does not…
Essais non destructifs — Contrôle par émission acoustique — Vocabulaire
La présente Norme internationale définit la terminologie utilisée dans le contrôle par émission acoustique et forme
une base commune pour les normes et l'utilisation générale.
Sterilization of health care products — Chemical indicators — Part 3: Type 2 indicators for use in t...
ISO 11140-3:2007 specifies the requirements for chemical indicators to be used in the steam penetration test for steam sterilizers for wrapped goods, e.g. instruments and porous materials. The indicator for this purpose is a Class 2 indicator as described in ISO 11140-1.
Indicators complying with ISO 11140-3:2007 are intended for use in combination with the standard test pack as described in EN…
Sterilization of health care products — Chemical indicators — Part 5: Type 2 indicators for Bowie an...
ISO 11140-5:2007 specifies the requirements for Class 2 indicators for Bowie and Dick-type air removal tests used to evaluate the effectiveness of air removal during the pre-vacuum phase of pre-vacuum steam sterilization cycles.
Additionally, ISO 11140-5:2007 includes test methods and equipment used to meet these performance requirements.
Digital imaging — Specification guideline for digital cameras
ISO 18383:2015 identifies a set of features that describes digital still cameras (DSCs), and it specifies their definitions, measurement methods, and presentation methods. This International Standard applies to DSCs designed and produced for and promoted to general consumers and need not be applied to those DSCs designed and produced to meet individual and special specifications agreed upon by…
Determination and use of straight-line calibration functions
ISO/TS 28037:2010 is concerned with linear, that is, straight-line, calibration functions that describe the relationship between two variables X and Y, namely, functions of the form Y = A + BX. Although many of the principles apply to more general types of calibration function, the approaches described exploit the simple form of the straight-line calibration function wherever possible.
Values of…
