Textiles — Détermination de la déformabilité des étoffes par distension forcée mécaniquement
Le présent document spécifie une méthode pour la détermination automatique de la déformabilité des étoffes textiles, y compris celle des textiles de renfort par fibres continues. Cette méthode n'est pas applicable aux étoffes imprégnées de résine.
La méthode est applicable aux étoffes telles que les étoffes tissées ou tricotées, les nontissés, les étoffes à base de fils sans embuvage, les…
Textiles — Determination of fabric deformability by forced mechanical distension
This document specifies a method for the automatic determination of the deformability of textile fabrics, including continuous-fibre reinforcement textiles. This method is not applicable to resin impregnated fabrics.
The method is suitable for use with fabrics such as woven or knitted fabrics, nonwovens, non-crimp fabrics, fabrics made of glass rovings or untwisted carbon filament yarns intended…
This document specifies design, construction, installation and test requirements for remote mechanical cable steering systems and the output ram interface point to rudders, jet drives, outboard and sterndrive engines for small craft.
It is applicable to three distinct classes of steering systems for use on various types of craft:
— standard duty steering systems, for small craft with single…
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -...
IEC 61300-3-30:2020 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
IEC 61300-3-30:2020 describes a method of measuring the end face geometry of rectangular multifibre ferrules…
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -...
IEC 61300-3-30:2020 describes a method of measuring the end face geometry of rectangular multifibre ferrules having an IEC defined optical interface. The primary attributes are fibre position relative to the end face, either withdrawal or protrusion, end face angle relative to the guide pin bores, fibre tip radii and core dip for multimode fibres. This second edition cancels and replaces the…
Dispositifs d'interconnexion et composants passifs fibroniques - Procédures fondamentales d...
IEC 61300-3-30:2020 décrit une méthode de mesure de la géométrie de la face terminale des ferrules rectangulaires multifibres ayant une interface optique définie par l’IEC. Les attributs primaires sont la position relative de la fibre par rapport à la face terminale, soit en enfoncement, soit en excroissance, et l’angle relatif de la face terminale par rapport aux forages de la broche de guidage…
Information technology - Automatic identification and data capture techniques - Direct Part Mark (DP...
This document is an engineering document intended for verifier manufacturers and application specification developers.
This document describes modifications to the symbol quality methodology defined in ISO/IEC 15415 and a symbology specification. It defines alternative illumination conditions, some new terms and parameters, modifications to the measurement and subsequent grading of certain…
Petits navires — Installations électriques — Installations à courant alternatif et continu
Le présent document spécifie les exigences concernant la conception, la construction et les installations des types suivants d'installations électriques à courants d.c et a.c. réalisées individuellement ou en combinaison sur les petits navires:
a) les installations électriques à courant continu à très basse tension (d.c.) qui fonctionnent à des tensions nominales inférieures ou égales à…
Small craft — Electrical systems — Alternating and direct current installations
This document specifies the requirements for the design, construction and installation of the following types of DC and AC electrical systems, installed on small craft either individually or in combination:
a) extra-low-voltage direct current (DC) electrical systems that operate at nominal potentials of 50 V DC or less;
b) single-phase alternating current (AC) systems that operate at a…
Information technology — Automatic identification and data capture techniques — Direct Part Mark (DP...
This document is an engineering document intended for verifier manufacturers and application specification developers.
This document describes modifications to the symbol quality methodology defined in ISO/IEC 15415 and a symbology specification. It defines alternative illumination conditions, some new terms and parameters, modifications to the measurement and subsequent grading of certain…
