Rechercher

IEC 60884-2-3:2025 applies to switched socket-outlets without interlock, for fixed installation, for AC only, with or without earthing contact, with a rated voltage not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors. This document applies to socket-outlets controlled by a manually operated mechanical switch. This…

IEC 60884-2-6:2025 applies to switched socket-outlets with interlock for AC only, for fixed electrical installations, with or without earthing contact, with rated voltage above 50 V but not exceeding 440 V and a rated current not exceeding 32 A, intended for household and similar purposes, either indoors or outdoors. Switched socket-outlets with interlock according to this document consist of a…

IEC 60884-2-7:2025 applies to cord extension sets, rewirable and non-rewirable, with or without earthing contact, with a rated voltage greater than 50 V but not exceeding 440 V and a rated current not exceeding 16 A, intended for household and similar purposes, either indoors or outdoors. This document does not apply to cord extension sets with means for reeling. Cord extension sets intended to…

This document establishes general principles of presentation to be applied to construction drawings for general arrangement and assembly, mainly within the field of building and architectural drawings.

This document specifies a procedure, at temperatures up to 100 °C, to determine whether a liquid product, that would be classified as “flammable” by virtue of its flash point, sustains combustion at the temperature(s) specified, for example, in regulations. NOTE            Many national and international regulations classify liquids as presenting a flammable hazard based on their flash point, as…

Le présent document spécifie les exigences de performance permettant d’établir les charges nominales pour des palettes plates neuves. Il spécifie également les essais nécessaires pour des palettes plates neuves dans diverses conditions de manutention et les exigences de performance pour des essais avec charges utiles. Le présent document ne s’étend pas aux palettes à superstructure fixe ou à…

Le présent document spécifie les noms, les symboles et les définitions des grandeurs et unités utilisées dans la science et les technologies de l'information. Des facteurs de conversion sont également indiqués, s'il y a lieu. Des préfixes pour multiples binaires sont aussi donnés.

Le présent document établit les principes généraux de présentation à appliquer aux dessins de construction pour la disposition générale et l’assemblage, principalement dans le domaine des dessins de bâtiment et d’architecture.

This document specifies a glow discharge optical emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metal oxide films. This method is applicable to oxide films 5 nm to 10 000 nm thick on metals. The metallic elements of the oxide can include one or more from Fe, Cr, Ni, Cu, Ti, Si, Mo, Zn, Mg, Mn, Zr and Al. Other elements that can…

This document specifies the performance requirements to establish nominal loads for new flat pallets. It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. This document does not apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the…