Maintenance of low voltage switchgear and controlgear and their assemblies
IEC TR 63482:2024 provides guidance for the specification and selection of the appropriate approach and for the planning and the execution of the maintenance of low-voltage switchgear and controlgear and their assemblies having a rated voltage up to and including 1 000 V AC or 1 500 V DC, and designed for a nominal frequency of the incoming supply or supplies not exceeding 1 000 Hz.
The content…
Electrical installations in ships - Part 379: Symmetrical category cables with transmission characte...
IEC 60092-379:2024 is applicable to shipboard and offshore units Ethernet (category) cables with extruded solid or foamed insulation, intended for fixed installations. Cables designed to maintain functional integrity during fire as specified in 6.1 and to be installed in explosive atmospheres as specified in 6.2 are included. The various types of Ethernet (category) cables are given in Clause 4.…
Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to e...
IEC 61786-1:2013+AMD1:2024 CSV provides guidance for measuring instruments used to measure the field strength of quasi-static magnetic and electric fields that have a frequency content in the range 1 Hz to 100 kHz and with DC magnetic fields to evaluate the exposure levels of the human body to these fields. Sources of fields include devices that operate at power frequencies and produce power…
Steel and iron — Determination of molybdenum content — Thiocyanate spectrophotometric method
This document specifies a thiocyanate spectrophotometric method for the determination of molybdenum contents in steel and iron. The method is applicable to molybdenum mass fractions between 0,005 % and 0,125 %.
Vanadium and tungsten interfere with the measurement if, because of their contents, the V/Mo ratio is greater than 16 or the W/Mo ratio is greater than 8.
Lubrifiants, huiles industrielles et produits connexes (classe L) — Famille T (Turbines) — Spécifica...
Le présent document spécifie les caractéristiques des fluides neufs à base d’esters de triaryl phosphate utilisés pour la régulation des turbines et pour d’autres systèmes hydrauliques dans les centrales électriques. Les fluides utilisés pour ce domaine d’application sont classés sous la catégorie TCD de l’ISO 6743-5.
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of...
This document specifies the characteristics of unused triaryl phosphate ester fluids for turbine governor controls and other hydraulic systems in electrical power stations. Fluids used in this application are classified under category TCD of ISO 6743-5.
Information technology — Network Controller Sideband Interface (NC-SI) specifications collection
This document defines the functionality and behavior of the Sideband Interface responsible for connecting the Network Controller to the Management Controller. It also outlines the behavioral model of the network traffic destined for the Management Controller from the Network Controller.
This document defines the following two aspects of the Network Controller Sideband Interface (NC‑SI):
behavior…
Pneumatic fluid power — Polyurethane and polyamide tubings for use primarily in pneumatic installati...
This document specifies the requirements for flexible thermoplastic polyurethane and polyamide tubing conveying compressed air, in sizes from 3 mm to 16 mm (1/8 inch to 1/2 inch) outside diameter.
Polyurethane tubings are dedicated for use in the temperature range from –20 °C to 60 °C, while polyamide tubings are dedicated for use in the temperature range from −20 °C to 80 °C. Working pressure…
Transmissions pneumatiques — Tubes en polyuréthane et en polyamide destinés à être utilisés principa...
Le présent document spécifie les exigences pour les tubes flexibles en polyuréthane thermoplastique et en polyamide transportant de l'air comprimé, pour les dimensions de 3 mm à 16 mm (1/8 in à 1/2 in) de diamètres extérieurs.
Les tubes en polyuréthane sont destinés à être utilisés dans une plage de températures de –20 °C à 60 °C, tandis que les tubes en polyamide sont destinés à être…