Explosive atmospheres — Part 29-1: Gas detectors — Performance requirements of detectors for flammab...
The requirements of the IEC 60079 series of Standards cover protection techniques with respect to
explosion hazard only. The CAN/CSA-C22.2 No. 60079 series of Standards (based on the adoption of
corresponding IEC Standards) is to be used in conjunction with other applicable Standards containing
the appropriate electrical safety requirements for general use equipment.
Group I electrical…
Energy performance of external ac-dc and ac-ac power supplies
1.1 General
This Standard specifies a test method for calculating the energy performance of external power supplies (EPS) across a full range of load conditions. It covers single-voltage and multiple-voltage external ac-dc and ac-ac power supplies.
Note: External power supplies are designed to convert line voltage ac into the low-voltage output (ac or dc) typically required by laptop computers,…
Energy performance of battery-charging systems and uninterruptible power supplies
1.1 General
This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or existing dc sources (such as automotive power jacks or USB ports). Uninterruptible power supplies that utilize the standardized National Electrical Manufacturer Association…
Gas-fired low pressure steam and hot water boilers
This Standard applies to newly produced gas-fired low-pressure steam and hot water boilers with gas inlet pressure ratings not exceeding 0.5 psi (3.5 kPa) and having input ratings of less than 12,500,000 Btu/hr (3 663 389 W) (see Clause 3, Definitions), hereinafter referred to as boilers*, constructed entirely of new unused parts and materials, for operation at or below the following pressures…
1.1
Cette norme s’applique au contreplaqué à collage pour l’extérieur qui comporte au moins trois plis et dont les fils des plis extérieurs sont parallèles.
1.2
Cette norme prescrit les exigences relatives aux éléments suivants :
a)
un système qualité ;
b)
les essences des plis ;
c)
les matériaux ;
d)
la construction des panneaux ;
e)
l’adhérence ;
f)
les qualités de placage et de…
1.1
1.1.1
This Standard establishes requirements for the planning, design, implementation, maintenance, evaluation, and continual improvement of wayfinding systems for HCFs.
1.1.2
This Standard addresses the following components of wayfinding as a user experience, a process, a plan, and a system:
a)
place;
b)
people;
c)
elements; and
d)
continual improvement.
1.2
This Standard sets…
Safe installation and operation of hemodialysis and peritoneal dialysis in a home setting
1 Scope
1.1
This Standard specifies requirements for the safe installation and operation of hemodialysis and peritoneal dialysis performed in a home setting. It is intended for use by dialysis providers, including health care workers and professionals who perform technical and operational functions associated with home dialysis, as well as stakeholders who have an interest in safety or related…
1.1
This Standard is intended to form the basis of a QMS within a health care or home setting for the purpose of providing safe, reliable kidney dialysis treatments.
Note: A comprehensive QMS can be achieved when this Standard is used in combination with the following related Standards:
a)
CAN/CSA-C22.2 No. 60601-1;
b)
CAN/CSA-C22.2 No. 60601-2-16;
c)
CAN/CSA-C22.2 No. 60601-2-39;
d)…
Lifts for the transfer of persons — Installation, use, and maintenance
1.1
This Standard applies to lifts and accessories used to transfer persons, specifically by suspending from above or supporting from below, between beds, chairs, stretchers, bathtubs, or other similar resting places or standing. This Standard applies to fixed and mobile lifts, lifting arm- or rail-mounted, including lifts often referred to as ceiling-lifts, portable-lifts, floor-lifts, sit-to-…
