Rechercher

1.1 General 1.1.1 This Standard provides guidelines for the commissioning of buildings and all energy and domestic water related building systems. It applies to new construction only for Part 3 buildings, as specified in the National Building Code of Canada (NBC). It does not apply to equipment and systems installed by the owner or others after building completion. 1.1.2 This Standard is intended…

1.1 This Standard, following the principles set out in CAN/CSA-Z1000, specifies requirements for a) establishing and maintaining an extreme conditions management system in accordance with occupational health and safety management system (OHSMS) principles; b) the roles and responsibilities of the management representative, the monitoring team, and the worker; c) management of external service…

This part of IEC 61000 specifies EMC immunity requirements which apply to electrical and electronic equipment intended for use in power stations and substations, as described below. Immunity requirements for electromagnetic phenomena with spectral contributions in the frequency range 0 Hz to 400 GHz are covered. No tests need to be performed at frequencies or for phenomena where no requirements…

This clause of Part 1 is applicable except as follows: 1.1 Replacement: In general, this part of IEC 60730 applies to timers and time switches that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. This standard is also applicable to individual timers utilized as part of a control system or…

1.1 Scope 1.1.1 Equipment included in scope [Add the following paragraph] This Standard covers equipment that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. 1.1.2 Equipment excluded from scope [Replace the third dashed item with the following] – safety ACTUATORs and SOLENOIDs performing a safety function as covered by CSA C22.2 No. 139;

1 Scope This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to drain cleaners. NOTE 101 Drain cleaners are also known as pipe cleaners. This standard does not apply to drills and impact drills, even if they can be used as a drain cleaners. NOTE 102 Transportable drain cleaners will be covered by a future part of IEC 62841-3. This standard does not…

L'article de la Partie 1 s’applique avec les exceptions suivantes: Addition: Cette partie de l'IEC 62841 s'applique aux furets portatifs. NOTE 101 Les furets sont également appelés déboucheurs de canalisations. La présente norme ne s'applique pas aux furets transportables. NOTE 102 Les furets transportables seront traités dans une future partie de l'IEC 62841-3. La…

This part of CISPR 16 specifies the methods of measurement of radiated disturbance phenomena in the frequency range of 9 kHz to 18 GHz. The aspects of measurement uncertainty are specified in CISPR 16-4-1 and CISPR 16-4-2. NOTE In accordance with IEC Guide 107 [13]1, CISPR 16-2-3 is a basic EMC publication for use by product committees of the IEC. As stated in Guide 107, product committees are…

La présente partie de la CISPR 16 spécifie les méthodes de mesure de phénomènes perturbateurs rayonnés, dans la plage de fréquences de 9 kHz à 18 GHz. Les aspects de l’incertitude de mesure sont spécifiés dans les normes CISPR 16-4-1 et CISPR 16-4-2. NOTE Selon le Guide 107 de l’IEC, la CISPR 16-2-3 est une publication fondamentale en CEM destinée à l'usage des comités de produits de l’IEC.…

This clause of Part 1 is applicable, except as follows. 1.1.1 Equipment included in scope Replacement: • This part of IEC 61010 specifies safety requirements and related verification tests for any product performing the function of control equipment and/or their associated peripherals. In addition, these products have as their intended use the command and control of machines, automated…