Rechercher

ISO 10215:2018 specifies a visual method for determining the image clarity of anodic oxidation coatings on aluminium and its alloys, using a chart scale and a lightness scale, which are defined. The method is applicable only to flat surfaces that can reflect the image of the chart scale pattern.

ISO 28017:2018 specifies requirements for two types, seven classes and three grades of wire- or textile-reinforced dredging hoses with nominal sizes ranging from 100 to 1 200. Within each class, all grades and sizes have the same maximum working pressure. Such hoses are suitable for the delivery or suction of seawater or freshwater mixed with silt, sand, coral and small stones with a specific…

ISO 28017:2018 spécifie les exigences pour deux types, sept classes et trois qualités de tuyaux de dragage à armature métallique ou textile, de dimensions nominales allant de 100 à 1 200. Dans chaque classe, toutes les qualités et dimensions ont la même pression maximale de service. Ces tuyaux sont adaptés pour le refoulement ou l'aspiration d'eau de mer ou d'eau douce mélangée à…

IEC 62595-2-2:2018(E) specifies the standard measurement conditions and measuring methods for determining electrical and optical performances of LED light bars with white LEDs used in LCD backlight units.

IEC 61747-40-6:2018(E) is a mechanical performance testing procedure for cover glass used in electronic flat panel displays in mobile devices. This document focuses on the measurement of surface fracture load after flaw introduction via grit particle abrasion. After abrasion, the retained surface fracture load is measured with the method documented in IEC 61747-40-4.

This Technical Report provides guidance to determine whether and which installed channels will support 25GBASE-T. It also provides mitigation procedures to improve the performance of installed channels to the point where the 25GBASE-T application is supported. Additionally, it recommends the use of Class I and Class II channels to support 25GBASE-T in new installations.

IEC 62595-2-3:2018(E) specifies the standard measurement conditions and measuring methods for determining electrical, optical, and electro-optical properties of LED frontlight units (FLUs) for reflective displays.

IEC TS 62607-4-6:2018(E) provides a method for determination of carbon content of nano electrode materials by infrared absorption spectroscopy method. The method is applicable to carbon contents of mass fraction between 0,001 % and 100 %. This method will enable customers to: a) decide whether or not a nano electrode material is usable, and b) select a nano electrode material with suitable…

ISO/IEC 27000:2018 offre une vue d'ensemble des systèmes de management de la sécurité de l'information (SMSI). Il comprend également les termes et définitions d'usage courant dans la famille de normes du SMSI. Le présent document est applicable à tous les types et à toutes les tailles d'organismes (par exemple: les entreprises commerciales, les organismes publics, les…

ISO 7500-1:2018 specifies the calibration and verification of tension/compression testing machines. The verification consists of: - a general inspection of the testing machine, including its accessories for the force application; - a calibration of the force-measuring system of the testing machine; - a confirmation that the performance properties of the testing machine achieve the…