Outils de manoeuvre pour vis et écrous — Clés polygonales doubles contre-coudées et contre-coudées p...
ISO 10104:2018 spécifie les longueurs hors tout et les épaisseurs maximales des têtes des clés polygonales doubles, contre-coudées profondes (Forme B) et contre-coudées (Forme A).
NOTE Les clés couvertes par le présent document sont identifiées sous les numéros 1 1 02 06 0 et 1 1 02 05 0 de l'ISO 1703:2005.
ISO 10104:2018 ne couvre pas les spécifications techniques pour ces produits.…
Outils de manoeuvre pour vis et écrous — Clés à fourche doubles — Dimensions extérieures
ISO 10102:2018 spécifie les longueurs hors tout et les épaisseurs maximales des têtes des clés à fourches doubles.
NOTE Les clés couvertes par le présent document sont identifiées sous le numéro 1 1 01 02 0 de l'ISO 1703:2005.
ISO 10102:2018 ne couvre pas les spécifications techniques pour ces produits. Les spécifications techniques sont données dans l'ISO 1711‑1:2016, série C.
Chaussures — Méthodes d'essai pour contreforts et bouts-durs — Aptitude au collage
ISO 20863:2018 spécifie une méthode de détermination de l'aptitude au collage des contreforts et des bouts-durs thermoactivés ou activés par solvant sur les matériaux constitutifs des tiges et des doublures.
Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 1: Molecular ab...
ISO 9233-1 | IDF 140-1:2018 specifies a method for the determination in cheese rind of natamycin mass fraction of above 0,5 mg/kg and surface-area-related natamycin mass of above 0,03 mg/dm2.
NOTE It is possible that the method is suitable for detecting migration of natamycin into the cheese.
Cheese, cheese rind and processed cheese — Determination of natamycin content — Part 2: High-perform...
ISO 9233-2 | IDF 140-2:2018 specifies a method for the determination of natamycin mass fraction in cheese, cheese rind and processed cheese of above 0,5 mg/kg and of the surface-area-related natamycin mass in cheese rind of above 0,03 mg/dm2.
Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Outside dim...
ISO 10102:2018 specifies the overall length and the maximum head thickness for double-headed open-ended engineers' wrenches.
NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference No. 1 1 01 02 0.
ISO 10102:2018 does not cover technical specifications for these products. Technical specifications are given in ISO 1711‑1:2016, series C.
Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — O...
ISO 10104:2018 specifies the overall length and the maximum head thickness for double-headed box wrenches, deep offset (Form B) and modified offset (Form A).
NOTE The wrenches covered by this document are the ones identified in ISO 1703:2005 under reference numbers 1 1 02 06 0 and 1 1 02 05 0.
ISO 10104:2018 does not cover technical specifications for these products. Technical…
Footwear — Test methods for stiffeners and toepuffs — Bondability
ISO 20863:2018 specifies a method for the determination of the bondability of heat activated and solvent activated stiffeners and toepuffs to upper and lining materials.
Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the m...
ISO 9631:2018 specifies material requirements for vulcanized rubber seals for hot drinking and non-drinking water supply (up to 110 °C).
The different seal designations specified are defined according to seal type, seal application and the requirements for a particular seal (see Table 2).
General requirements for finished joint seals are also given. Any additional requirements called for by the…
Internal combustion engines — Piston rings — Part 1: Vocabulary
ISO 6621-1:2018 defines the most commonly used terms for piston rings. These terms designate either types of piston rings or certain characteristics and phenomena of piston rings.
The terms and definitions in this document apply to piston rings for reciprocating internal combustion engines. They may also be used for piston rings of compressors working under analogous conditions.
NOTE 1 Further…
