ISO 4898:2018 specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
ISO…
Information technology - Scalable compression and coding of continuous-tone still images - Part 5: R...
ISO/IEC 18477-5:2018 provides reference implementations of multiple parts of the ISO/IEC 18477 series, also known under the name "JPEG XT". JPEG XT is designed primarily for compression of continuous-tone photographic content.
Implants chirurgicaux — Matériaux métalliques — Partie 2: Titane non allié
L'ISO 5832-2:2018 spécifie les caractéristiques du titane non allié utilisé pour la fabrication des implants chirurgicaux et les méthodes d'essai correspondantes.
Le Tableau 2 répertorie six nuances de titane fondées sur la résistance à la traction.
NOTE Les caractéristiques mécaniques d'un échantillon prélevé sur un produit fini fabriqué avec ce métal ne sont pas…
Intelligent transport systems — Traffic and travel information via transport protocol experts group,...
ISO/TS 21219-21:2018 defines a method of using geographic location referencing (GLR) that can be used by relevant TPEG applications. The GLR type is defined in this document. It is used for defining geographic location references (points, polylines, and geographical areas). The GLR method is intended to be one of the methods that can be transported inside a TPEG-location referencing container (…
Machines à bois — Sécurité — Partie 10: Scies de chantier
L'ISO 19085-10:2018 donne les exigences et les mesures de sécurité pour les scies de chantier transportables, conçues pour la coupe de bois et de matériau ayant des caractéristiques physiques similaires à celles du bois, ci-après désignées «machines».
NOTE 1 Pour la définition de machine transportable, voir l'ISO 19085‑1:2017, 3.5.
L'ISO 19085-10:2018 traite de tous les…
Woodworking machines — Safety — Part 10: Building site saws (contractor saws)
ISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines".
NOTE 1 For the definition of displaceable machine, see ISO 19085‑1:2017, 3.5.
ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as…
Implants chirurgicaux — Propreté des implants orthopédiques — Exigences générales
L'ISO 19227:2018 spécifie des exigences relatives à la propreté des implants orthopédiques, ci-après appelés implants, et aux méthodes d'essai utilisées pour la validation du procédé de nettoyage et les contrôles, qui sont basées sur un processus de gestion des risques.
L'ISO 19227:2018 ne spécifie pas d'exigences pour le conditionnement ou la stérilisation, celles-ci étant…
Implants for surgery — Cleanliness of orthopedic implants — General requirements
ISO 19227:2018 specifies requirements for the cleanliness of orthopaedic implants, hereafter referred to as implants, and test methods for the cleaning process validation and controls, which are based on a risk management process.
ISO 19227:2018 does not specify requirements for packaging or sterilization which are covered by other International Standards.
ISO 19227:2018 applies to in-process…
Classification of environmental conditions - Part 2-7: Environmental conditions appearing in nature ...
IEC 60721-2-7:2018 addresses the occurrence of fauna and flora, including its main effects on electrotechnical products. Exposure and damage from the effects of fauna and flora can occur at almost any time in a product's life cycle. Moreover, there are many agents of attack with various actions.<br />
This second edition cancels and replaces the first edition published in 1987. This…
Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level ...
IEC 60754-3:2018 specifies the apparatus and procedure for the measurement of the amount of halogens evolved during the combustion of materials taken from electric or optical fibre cable constructions.<br />
The method specified in this document is intended for the measurement of the content of chlorine (Cl), bromine (Br), fluorine (F) and iodine (I), by using the analytical technique of…
