Essais non destructifs — Caractérisation et vérification de l'appareillage de contrôle par ultr...
Le présent document spécifie les essais de caractérisation à effectuer à l'issue de la fabrication d'un traducteur multiélément. Il définit à la fois la méthodologie et les critères d'acceptation.
Le présent document s'applique aux traducteurs multiéléments utilisés pour les essais non destructifs par ultrasons [technique multiélément ou technique de traitement du signal, par…
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-...
This document specifies requirements for classification of rods, wires and deposits in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine-grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.
This document is a combined specification providing classification utilizing a…
Road vehicles — General requirements and test methods of in-vehicle optical harnesses for up to 100 ...
This document specifies the performance requirements and test methods for optical harnesses for up to 100 Gbit/s per fibre channel for in-vehicle data communication between electronic devices including in-line connections. The optical harness consists of cables and connectors, including cable to cable (in-line) connectors and electronic device (header) connectors. Safety (electrical safety,…
Information technology — Small computer system interface (SCSI) — Part 346: Zoned Block Commands - 2...
This document defines the model and command set extensions to facilitate operation of zoned block devices. The clauses in this document, implemented in conjunction with the applicable clauses of SPC-6 and SBC-5, specify the standard command set for zoned block devices.
This document provides guidance on protective measures for consideration in fire risk reduction through machine design and operation and maintenance instructions for earth-moving machinery, as defined in ISO 6165, during their intended use.
NOTE The information in this document presumes that fire hazards for the normal applications anticipated for the machine family by the machine…
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — P...
This document specifies characterization tests to be performed at the end of the fabrication of an array probe. It defines both methodology and acceptance criteria.
This document is applicable to the following array probes used for ultrasonic non-destructive testing [phased array technique or signal processing technique, e.g. full-matrix capture (FMC) and total-focusing technique (TFM)] in…
Produits consommables pour le soudage — Baguettes, fils et dépôts pour soudage TIG des aciers non al...
Le présent document spécifie les exigences relatives à la classification des baguettes, des fils et des dépôts à l’état brut de soudage et à l’état de traitement thermique après soudage, par soudage TIG des aciers non alliés et des aciers à grains fins ayant une limite d’élasticité minimale pouvant atteindre 500 MPa ou une résistance à la traction minimale pouvant atteindre 570 MPa.
Le présent…
Information technology - Small computer system interface (SCSI) - Part 346: Zoned Block Commands - 2...
This document defines the model and command set extensions to facilitate operation of zoned block devices. The clauses in this document, implemented in conjunction with the applicable clauses of SPC-6 and SBC-5, specify the standard command set for zoned block devices.
Guidance on fungus resistance of optical fibre cables
IEC TR 63484:2024 information about fungal growth on the outer sheath of optical fibre cables and on the inner components of the cable. It also provides guidance for specifying fungus resistance performance of optical cable outer sheath and internal cable components, including recommendations for fungus resistance test method as well as evaluation after test.
This document applies to optical…
