Agricultural irrigation equipment — Pressure losses in irrigation valves — Test method
This document applies to manually-activated valves only.
This document specifies a test method for determining the pressure loss in agricultural irrigation valves under steady-state conditions when water flows through them. The scope and accuracy of the valve performance specifications presented will assist agricultural irrigation system designers in comparing pressure losses through various…
Essais non destructifs — Qualité d'image des radiogrammes — Partie 5: Détermination de l'i...
Le présent document spécifie une méthode de détermination de l'indice de flou total de l'image et de la résolution spatiale de base des radiogrammes et des images radioscopiques. L'IQI avec jusqu'à 13 paires de fils peut être utilisé efficacement avec des tensions de tube pouvant atteindre 600 kV. L'IQI avec plus de 13 paires de fils peut être utilisé efficacement avec…
Robotics — Safety design for industrial robot systems — Part 1: End-effectors
This document provides guidance on safety measures for the design and integration of end-effectors used for robot systems. The integration includes the following:
— the manufacturing, design and integration of end-effectors;
— the necessary information for use.
This document provides additional safety guidance on the integration of robot systems, as described in ISO 10218‑2:2011.
Thermal insulation — Building elements — In-situ measurement of thermal resistance and thermal trans...
This document describes the infrared method for measuring the thermal resistance and thermal transmittance of opaque building elements on existing buildings when observing high emissivity diffuse surface using an infrared (IR) camera. This document demonstrates a screening test by quantitative evaluation to identify the thermal performance defect area of building elements.
This document aims to…
Non-destructive testing — Image quality of radiographs — Part 5: Determination of the image unsharpn...
This document specifies a method of determining the total image unsharpness and basic spatial resolution of radiographs and radioscopic images. The IQI with up to 13 wire pairs can be used effectively with tube voltages up to 600 kV. The IQI with more than 13 wire pairs can be used effectively at tube voltages lower than 225 kV. When using source voltages in the megavolt range, it is possible…
Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related int...
This document defines test methods for characteristics of integrated circuit cards with contacts and related interface devices according to the definition given in ISO/IEC 7816-3. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 that defines the information storage technologies employed in identification card applications.
NOTE Criteria for…
Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related int...
This document defines test methods for characteristics of integrated circuit cards with contacts and related interface devices according to the definition given in ISO/IEC 7816-3. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 that defines the information storage technologies employed in identification card applications.
NOTE Criteria for…
Transportable gas storage devices — Hydrogen absorbed in reversible metal hydride
This document defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as "metal hydride assemblies" (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa.
This document is applicable to refillable storage MH…
Fire protection — Fire extinguishing media — Powder
This document specifies requirements for the chemical and physical properties, and for minimum performance in defined test methods, of fire extinguishing powders suitable for use against fires of classes A, B, C and D. Requirements are also given for the information and data to be declared by the manufacturer.
NOTE The classification of fires is given in ISO 3941.
Stérilisation des produits de santé — Indicateurs biologiques et chimiques — Appareillage d'ess...
Le présent document spécifie les exigences relatives à l'équipement d'essai à utiliser pour:
— s'assurer de la conformité des indicateurs biologiques des procédés de stérilisation à la vapeur, à l'oxyde d'éthylène gazeux et à la chaleur sèche avec les exigences indiquées dans la série ISO 11138;
— s'assurer de la conformité des indicateurs chimiques…
