Rechercher

IEC 61784-5-12:2018(E) specifies the installation profiles for CPF 12 (EtherCAT™) .<br /> This deliverable contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918.<br /> This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile…

IEC 61784-5-2:2018 specifies the installation profiles for CPF 2 (CIP™ ). This contribution contains a number of related files covering the communication profiles to be used in conjunction with IEC 61918. The installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF) by stating which…

IEC 61784-5-18:2018 (E) specifies the installation profiles for CPF 18 (SafetyNETp).<br /> This contribution contains a number of related files covering the communication profiles to be used with IEC 61918.<br /> This installation profile documents contained herewith provide the installation profiles of the communication profiles (CP) of a specific communication profile family (CPF)…

This document covers the monitoring of air cleanliness by particles in terms of concentration of airborne nanoscale particles. For monitoring purposes, only populations of particles with a lower size limit of 0.1 microns (100 nm) or less ? "nanoscale" ? are considered. The monitoring given in this document is for use mainly in "operational" states. NOTE 1 For the purposes…

This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food. It also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food. It is applicable to enamelled articles, including tanks and vessels, which are intended to be…

Le présent document spécifie les méthodes pour: a) les essais de fluage ininterrompu avec surveillance continue de l'extension, b) les essais de fluage interrompus avec mesurage périodique de l'allongement, c) les essais de rupture sous contrainte lorsque seul le temps jusqu'à la rupture est normalement mesuré, d) un essai pour vérifier qu'un temps prédéterminé…

This document gives a list of the botanical names of plants used for the production of essential oils, together with the common names of the essential oils. An alphabetical index of common names of essential oils is included at the end of this document.

Le présent document fournit une liste des noms botaniques de plantes utilisées pour la production des huiles essentielles, avec les noms communs des huiles essentielles. Un index alphabétique des noms communs des huiles essentielles est inclus à la fin du présent document.

This document specifies the methods for a) uninterrupted creep tests with continuous monitoring of extension, b) interrupted creep tests with periodic measurement of elongation, c) stress rupture tests where normally only the time to fracture is measured, d) a test to verify that a predetermined time can be exceeded under a given force, with the elongation or extension not necessarily…

This document specifies the requirements for medium tolerance sling chains of grade 4 from stainless steel for use preferably in chain slings of grade 4 from stainless steel or for other lifting purposes. The range of nominal diameter, dn, covered by this document is from 4 mm to 22 mm. These sling chains are round steel short link chains with a nominal pitch, pn = 3 × dn, electrically welded,…