Cleanrooms and associated controlled environments — Part 12: Specifications for monitoring air clean...
This document covers the monitoring of air cleanliness by particles in terms of concentration of airborne nanoscale particles.
For monitoring purposes, only populations of particles with a lower size limit of 0.1 microns (100 nm) or less ? "nanoscale" ? are considered.
The monitoring given in this document is for use mainly in "operational" states.
NOTE 1 For the purposes…
Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of t...
This document specifies a simulating method of test for determination of the release of metal-ions from enamelled articles, which are intended to come into contact with food.
It also specifies limits for the release of metal-ions from enamelled articles, which are intended to come into contact with food.
It is applicable to enamelled articles, including tanks and vessels, which are intended to be…
Matériaux métalliques — Essai de fluage uniaxial en traction — Méthode d'essai
Le présent document spécifie les méthodes pour:
a) les essais de fluage ininterrompu avec surveillance continue de l'extension,
b) les essais de fluage interrompus avec mesurage périodique de l'allongement,
c) les essais de rupture sous contrainte lorsque seul le temps jusqu'à la rupture est normalement mesuré,
d) un essai pour vérifier qu'un temps prédéterminé…
This document gives a list of the botanical names of plants used for the production of essential oils, together with the common names of the essential oils.
An alphabetical index of common names of essential oils is included at the end of this document.
Le présent document fournit une liste des noms botaniques de plantes utilisées pour la production des huiles essentielles, avec les noms communs des huiles essentielles.
Un index alphabétique des noms communs des huiles essentielles est inclus à la fin du présent document.
Metallic materials — Uniaxial creep testing in tension — Method of test
This document specifies the methods for
a) uninterrupted creep tests with continuous monitoring of extension,
b) interrupted creep tests with periodic measurement of elongation,
c) stress rupture tests where normally only the time to fracture is measured,
d) a test to verify that a predetermined time can be exceeded under a given force, with the elongation or extension not necessarily…
Round steel short link chains for lifting purposes — Medium tolerance sling chains — Grade 4, stainl...
This document specifies the requirements for medium tolerance sling chains of grade 4 from stainless steel for use preferably in chain slings of grade 4 from stainless steel or for other lifting purposes.
The range of nominal diameter, dn, covered by this document is from 4 mm to 22 mm.
These sling chains are round steel short link chains with a nominal pitch, pn = 3 × dn, electrically welded,…
Information technology — Conformance test methods for security service crypto suites — Part 19: Cryp...
This document describes test methods for determining the conformance of security crypto suites with the specifications given in ISO/IEC 29167‑19.
This document contains conformance tests for all mandatory and optional functions.
The conformance parameters are the following:
— parameters that apply directly, affecting system functionality and inter-operability;
— protocol…
Textiles — Qualitative and quantitative proteomic analysis of some animal hair fibres — Part 2: Pept...
This document specifies a qualitative and quantitative procedure to determine the composition of animal hair fibre blends by MALDI-TOF MS.
The composition of non-animal hair fibres can be measured by methods described in the ISO 1833 series. Both results are then combined to determine the whole composition of fibres.
The method is based on a preliminary identification, by light microscopy, of all…
Textiles — Analyse protéomique qualitative et quantitative de certaines fibres animales — Partie 2: ...
Le présent document spécifie une méthode qualitative et quantitative pour déterminer la composition des mélanges de fibres animales par MALDI-TOF MS.
La composition de fibres non animales peut être déterminée par les méthodes décrites dans la série ISO 1833. Les deux résultats sont ensuite combinés pour déterminer la composition globale des fibres.
La méthode repose sur une identification…
