Rechercher

This document specifies requirements for 8-strand braided ropes, for 12-strand braided ropes, and for covered rope constructions for general purpose made of high modulus polyethylene (HMPE), and gives rules for their designation. Many different types and grades of HMPE fibre exist which are commonly used to produce rope products. This document does not cover all variations in strength or product…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. This International Standard also includes…

1 Scope 1.1 This Standard sets out requirements for the selection, use, and care of respirators and for the administration of an effective respiratory protection program in the workplace. 1.2 This Standard is applicable to the selection, use, and care of respirators for non-emergency and emergency situations. 1.3 This Standard is not intended to address the selection of a) respirators for…

1 Scope 1.1 This Standard describes methods for determining the occupational noise exposure level of workers (Lex,T) using sampling techniques. Lex,T represents the long-term noise exposure of workers and is calculated from measurements of Leq,t (3 dB exchange rate) in the workplace. Notes: 1) The methods in this Standard are based on established definitions, units, instrumentation, and…

1 Scope This document establishes five modes of operation for applications of an n-bit block cipher (e.g.protection of data during transmission or in storage). The defined modes only provide protection of data confidentiality. Protection of data integrity is not within the scope of this document. Also, most modes do not protect the confidentiality of message length information. NOTE 1 Methods…

1 Scope This part of ISO/IEC 14543-5 specifies the core protocol of IGRS user and device remote access, including intelligent grouping and resource sharing. The protocol features are: a) IGRS RA user and IGRS RA device concepts and relationship management mechanisms, b) user and device remote discovery and online and offline status management mechanisms, c) user and device remote access…

1 Scope This part of ISO/IEC 14543-5 specifies the basic functionalities, module structures and interfaces in an IGRS RA service platform (IRSP). The service interaction flow and the request/response message formats are also specified. This document is applicable to remote access of an IGRS sub-network (called an IGRS subnet) for resource sharing and service collaboration among home and/or…

1 Scope This standard defines the protocol layer of the Serial Attached SCSI (SAS) interconnect and three transport protocols that use the SAS interconnect: a) Serial SCSI Protocol (SSP): a mapping of SCSI supporting multiple initiators and targets; b) Serial ATA Tunneled Protocol (STP): a mapping of Serial ATA expanded to support multiple initiators and targets; and c) Serial Management…

1 Scope This part of ISO/IEC 14776 defines the command set extensions to facilitate operation of SCSI direct access block devices. The clauses in this standard, implemented in conjunction with the applicable clauses of SPC-4, specify the standard command set for SCSI direct access block devices. The objectives of this standard are to: a) permit an application client to communicate over a…

1 Scope ISO/IEC 18013 establishes guidelines for the design format and data content of an ISO-compliant driving licence (IDL) with regard to human-readable features (ISO/IEC 18013-1), ISO machine-readable technologies (ISO/IEC 18013-2), and access control, authentication and integrity validation (ISO/IEC 18013-3). It creates a common basis for international use and mutual recognition of the…