Rechercher

1 Scope This document specifies the characteristics of the UPnP networked device named WANConnectionDevice, version 2. This device definition is compliant with UPnP Device Architecture 1.0 [14] and UPnP Device Architecture 1.1 [15].

1 Scope This service template is compliant with the UPnP Device Architecture version 1.0 [14]. It defines a service type referred to herein as RenderingControl. 1.1 Introduction Most rendering devices contain a number of dynamically configurable attributes that affect how the current content is rendered. For example, video rendering devices, such as TVs, allow user control of display…

1 Scope This document specifies the characteristics of a UPnP embedded virtual device that models a physical Wide Area Network interface on an Internet gateway. This specification describes version 2 of the device named WANDevice (WANDevice:2). WANDevice:2 also enables the control of the WAN interface, and is a required device in the UPnP Internet Gateway Device Control Protocol (as…

1 Scope 1.1 This Standard is intended to provide basic requirements for the evaluation of double-insulated cord- connected electrical equipment. 1.2 This Standard applies to equipment for use on branch circuits installed in accordance with CSA C22.1, Canadian Electrical Code, Part I, and not exceeding 250 V-to-ground. 1.3 This Standard supplements individual standards of the Canadian…

1 Scope 1.1 This Standard applies to products and component devices where the electronics technology handles the operational logic including the safety features. This Standard applies to the following configurations: a) safety control function(s) implemented in hardware only; and b) safety control function(s) implemented in some combinations of hardware and software. Note: Clauses that are…

1 Scope 1.1 This Standard applies to corrugated electrical nonmetallic tubing (ENT) and mechanically-attached fittings, for use in accordance with C22.1, Canadian Electrical Code, Part I (CE Code), NFPA 70, National Electrical Code (NEC) and NOM-001-SEDE, Standard for Electrical Installations (Mexico). These requirements also apply to mechanically-attached fittings integral with an outlet box…

1 Scope This document specifies the characteristics of the UPnP networked service named WANIPv6FirewallControl, version 1. This service definition is compliant with UPnP Service Architecture 1.0 [1]. This service supports the management IPv6 firewall pinholes in Internet gateway devices independent of the WAN access type (PPP, DHCP, …). It also supports access control to restrict operations…

1 Scope This document describes an architecture that allows UPnP Telephony devices, services and control points defined in the propoded DCP to be deployed in the home network environment and to enable management of incoming and outgoing telephony calls, messaging, presence information and phone features configuration through UPnP means from devices within the home. In order to accommodate…

1 Scope This document defines a device type named TelephonyClient, that complies with [1]. The TelephonyClient device is a UPnP device that allows control points to exploit a set of telephony features such as management of media session with a telephony server, messaging, presence etc via UPnP though other UPnP enabled home network devices. This device provides control points with the…

1 Scope This document defines a device type named TelephonyServer that complies with [1]. The TelephonyServer device is a UPnP device that allows control points to exploit a set of telephony features such as managing telephony calls, messaging, presence etc via UPnP though other UPnP enabled home network devices. This device provides control points with the following functionality: ?…