Rechercher

IEC 61009-2-2:2024 applies to residual current operated circuit-breakers, with integral overcurrent protection, for household and similar uses (hereafter referred to as RCBOs), classified according to IEC 61009-1:2024, 4.1.2, 4.1.3, 4.1.4, 4.1.5 and 4.1.6. RCBOs according to this document are intended for voltages not exceeding 440 V AC with frequencies of 50 Hz, 60 Hz or 50/60 Hz and currents…

IEC TS 62271-316:2024 is applicable to direct current (DC) converter by-pass switches (CBPS) and paralleling switches (PS) designed for indoor or outdoor installation and for operation on HVDC transmission systems having direct voltages of 100 kV and above. Switches other than mechanical switching devices used for the same applications specified here are not covered by this document.

IEC 61008-1:2024 gives general requirements and tests for residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (hereafter referred to as RCCBs), for rated operational voltages not exceeding 440 V AC, with rated frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated currents not exceeding 125 A, intended principally for protection against…

L'IEC 61008-1:2024 spécifie les exigences générales et les essais relatifs aux interrupteurs automatiques à courant différentiel résiduel sans dispositif de protection contre les surintensités incorporé pour usages domestiques et analogues (ci-après appelés ID), de tension d'emploi assignée inférieure ou égale à 440 V en courant alternatif avec une fréquence assignée de 50 Hz, 60 Hz ou…

This document specifies the design of ductile iron pipes used for conveying water, sewerage and other fluids —    with or without internal pressure, and —    with or without earth and traffic loading. The design method defined in this document is applicable to ductile iron pipes conforming to ISO 2531, ISO 7186 and ISO 16631.

Le présent document spécifie les exigences fondamentales et leurs méthodes d’essai relatives aux montures de lunettes dépourvues de verre conçues pour être équipées de verres correcteurs. Il est applicable aux montures de lunettes au point de vente par le fabricant ou le fournisseur jusqu’au détaillant. Le présent document est applicable: —     à tous les types de montures de lunettes produites…

This document specifies fundamental requirements and their test methods for unglazed spectacle frames designed for use with prescription lenses. It is applicable to spectacle frames at the point of sale by the manufacturer or supplier to the retailer. This document is applicable to: —     all mass-produced spectacle frame types, including rimless mounts, semi-rimless mounts and folding spectacle…

Le présent document spécifie les exigences relatives au contrôle, à l'inspection et aux essais périodiques des conteneurs pour une utilisation en mer, construits conformément à l'ISO 10855-1, ayant une masse brute maximale inférieure ou égale à 25 000 kg, et de leurs dispositifs de levage associés, destinés à un usage répété à destination, en provenance ou entre des installations en mer…

This document specifies requirements for the periodic inspection, examination and testing of offshore containers, built in accordance with ISO 10855-1 and with a maximum gross mass not exceeding 25 000 kg, and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers…

This document specifies requirements for the design, manufacture and marking of offshore containers with a maximum gross mass not exceeding 25 000 kg, intended for repeated use to, from and between offshore installations and ships. This document specifies only transport-related requirements.