Pulps — Determination of manganese content — Sodium periodate photometric and flame atomic absorptio...
Specifies two methods based on the ashing of the pulp and the disolution of the ash in hydrochloric acid, both of them being applicable to all kinds of pulp.
Non-conductive coatings on non-magnetic basis metals — Measurement of coating thickness — Eddy curre...
This second edition cancels and replaces the first edition (i. e. ISO 2360:1972). Specifies a non-destructive measurement. The method is applicable for measurements of the thickness of most oxide coatings produced by anodizing, but it is not applicable to all conversion coatings, some of which are too thin to be measured by this method.
Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating th...
This second edition cancels and replaces the first edition (i. e. ISO 2361:1972). Specifies the method of using coating thickness instruments of the magnetic type ror non-destructive measurements of the thickness. The method may nkot be applicable to autocatalytic (electroless) nickel coatings. For the purpose of this Standasd, two types of nickel coating are disringuished: coatings on magnetic…
Road vehicles — Anchorages for towing ropes, cables or bars
Specifies the characteristics of the towing anchorages mounted on road vehicles, allowing them to be towed or to tow another vehicle. Applies to passenger cars as defined in ISO 3833 and to other vehicles which have a maximum authorized total weight not exceeding 3,5 tonnes. The shape of the anchorages is left to the manufacturer's option.
Manganese ores and concentrates — Determination of phosphorus content — Extraction-molybdovanadate p...
The method is applicable to products having phosphorus contents from 0,02 to 0,5 % (m/m). ISO 4293 should be read in conjunction with ISO 4297. Specifies principle, reagents, apparatus, sample, procedure and expression of results.
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and m...
Specifies the type, location and method of operation (including direction of motion) of controls. The controls are divided into two categories: - ride-on machinery; -pedestrian-operated machines. The controls included in this part are those which are located at the operator's normal working position.
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and m...
Specifies the type, location and method of operation (including direction of motion) of controls. The controls are divided into two categories: - ride-on machinery; - pedestrian-operated machines. The control location and method of operation in this part are supplementary to the requirements established in ISO 3789/1. The controls included in this part are those which are located at the operator…
Hardmetals — Determination of transverse rupture strength
This second edition cancels and replaces the first edition (i.e. ISO 3327:1975). Is applicable to hardmetals of negligible ductility. If it is used for hardmetals showing significant plastic deformation before breaking, incorrect results may be obtained. In such instances, the method may be used for comparison purposes only. Gives symbols and designations in table 1, dimensions of test pieces in…
