Rechercher

This standard specifies design and performance requirements for trench drains, utility channel, and grate systems that are used inside or, or adjacent to, building structures that are typically non-residential. These channels...

This Standard specifies requirements pertaining to the quality and uniformity of softwood lumber manufactured in Canada and establishes the designation “Canadian Standard Lumber” for lumber that meets the requirements of this...

CSA Z317.13 is part of a series of Standards related to health care facility engineering and sets forth preventive measures intended to protect patients, staff, and visitors from disease transmission and other health problems...

1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the...

1.1 These requirements cover liquid-tight flexible nonmetallic conduit in the 3/8 – 4 (12 – 103) trade sizes of Type LFNC-A (Layered), Type LFNC-B (Integral), and Type LFNC-C (Corrugated) constructions. The conduit is...

1.1 This Standard applies to low-voltage fuses rated 1000 V or less, AC and/or DC, with interrupting ratings up to 300 kA (200 kA for Mexico). These fuses are intended to be used in accordance with the Canadian Electrical...

1.1 * Scope This International Standard applies to the reduction of adverse ENVIRONMENTAL IMPACTS of MEDICAL ELECTRICAL EQUIPMENT, hereafter referred to as ME EQUIPMENT. MEDICAL ELECTRICAL SYSTEMS are excluded from the scope...

This document focuses on the abstract interface between an application and the data processor and includes the specification and definition of application commands and responses. It allows data and commands to be specified in...

This Standard is designed to be used with related occupational or technical standards. It is intended to be referenced by other standards as the primary set of requirements for health and safety management of work in confined...

This clause of Part 1 is applicable, except as follows: Addition: This Standard applies to chain saws for cutting wood and designed for use by one person. This Standard does not cover chain saws designed for use in...

1.1 These requirements cover electrical metallic tubing - steel (EMT) and elbows for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1, Canadian Electrical Code, Part 1, NOM-001-SEDE...

1.1 This Standard specifies the requirements for three-phase, pad-mounted distribution transformers, consisting of a transformer and a cable entrance compartment with provision for separable insulated high-voltage connectors...