Rechercher

1.1 General This Standard applies to electric hot tubs/spas that are factory-built, self-contained packaged units supplied with equipment for heating and circulating water. These units are connected to an electrical supply...

The ISO/IEC 10373 series defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which can be ISO...

1.1 This Standard applies to arc fault protective devices designed to be installed in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 These devices include arc fault circuit interrupters (AFCI) and...

1.1 This Standard specifies requirements for the mechanical, electrical, and environmental performance of connectors designed for installation on the bare surface of overhead line conductors at normal operating temperatures...

1.1 This Standard specifies the mechanical and electrical characteristics of three-phase network distribution transformers having rated primary voltages up to 34.5 kV and kV-A ratings of 500 to 2500. Note: It is possible that...

This Recommendation | International Standard: gives an introduction and motivation for ODP; provides an overview of the Reference Model of Open Distributed Processing (RM-ODP) and an explanation of its key concepts; gives...

1.1 This Standard applies only to the following electrically driven, mechanical, vapour-compression-type systems: a) large air conditioners and heat pumps rated above 19 kW (65 000 Btu/h) cooling or heating capacity at...

1.1 This Standard covers the electrical and mechanical characteristics of (a) round 1350 aluminum wires used before compacting in the construction of conductors; and (b) bare compact round aluminum stranded conductors...

1.1 This Standard covers assemblies of wiring terminals and supporting blocks for copper conductors, copper and aluminum conductors, and aluminum conductors rated at a maximum of 1500 V and 2000 kcmil, intended to provide for...

1 Scope 1.1 General This Standard specifies design, testing, marking, and information requirements for use of full body harnesses. Full body harnesses are intended for use as body supports in personal fall arrest systems and...

1 Scope 1.1 General This Standard specifies requirements for the performance, design, testing, marking, and instructions of energy absorbers and lanyards, including lineman’s pole straps and integrally connected lanyards and...

1.1 This Standard specifies construction and testing requirements for unarmoured mine power feeder cables normally used for power distribution in stationary or semi-stationary applications covered by CSA M421 and the Canadian...