Rechercher

1.1 These requirements cover bare and covered ferrules intended for field wiring and factory wiring for use in accordance with the National Electrical Code, ANSI/NFPA-70 and Canadian Electrical Code, CSA C22.1. 1.2 These...

1.1 Cette norme s'applique aux conduits métalliques rigides en acier (ERMC-S) ainsi qu'à leurs coudes, raccords et mamelons, destinés à la fabrication des canalisations métalliques pour fils et câbles conformément à la CSA...

1.1 Cette norme s'applique aux tubes électriques métalliques (EMT) en acier ainsi qu'à leurs coudes, destinés à la fabrication de canalisations métalliques pour fils et câbles conformément à la CSA C22.1, Code canadien de l...

1.1 Inclusions 1.1.1 This International Standard specifies general requirements for the characterization of a sterilizing agent and for the development, validation and routine monitoring and control of a sterilization process...

1. Scope 1.1 These requirements cover electrical rigid metal conduit - steel (ERMC-S), elbows, couplings, and nipples for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1, Canadian...

This International Standard specifies the characteristics and location of a magnetic stripe on a savingsbook as defined in Clause 4 and the use of such savingsbooks for international interchange. Compatibility with...

Remarque : Le numéro de référence des normes pour cet avis d'intention (publié à l'origine le 25 avril 2023) a été mis à jour par l'OEN responsable le 13 février 2024. Note : À la demande de l'OEN responsable, cet avis d...

Scope: This clause of Part 1 is replaced by the following. This International Standard specifies safety requirements for electrically operated commercial refrigerating appliances that have an incorporated compressor or that...

This Standard covers the following: - different input requirements catering for national and international practices and support of cultural and linguistic diversity; - recognition of requirements regarding comfort of use...

This Standard applies to transportable drills, with manually fed axial movement of the spindle, having a maximum chuck capacity of 13 mm. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V...

1.1 General This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or...

Scope This clause of IEC Publication 335-1 is applicable except as follows: 1.1 Replacement: This standard applies to electric fans and their associated regulators intended for use on single-phase a.c. and d.c. circuits not e...