Rechercher

The proposed first edition of CAN/ULC-S589 is a binational standard that will cover requirements for heat-actuated, single and multiple station heat alarms intended for indoor installation in accordance with the following: In...

1 Scope 1.1 These requirements cover suspended ceiling grid low voltage/extra-low voltage systems and equipment intended for installation and use in accordance with the: In Canada: Canadian Electrical Code, Part I, Safety...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric range hoods and other cooking fume extractors intended for installing above, beside, behind or under household...

Scope: This proposed standard is the second project in a series of standards on workplace first aid in Canada. Based on recommendations from stakeholders and support from governmental agencies responsible for occupational...

A new CSA national Technical Standard is to be developed that will work to adopt/adapt the National Research Council of Canada’s Technical Reports on Vehicular Breath Alcohol Interlock Devices in Canada. This document will be...

These requirements cover automatic, non-automatic and manual transfer switches operating at voltages of 1000 V ac and higher, and intended for use in ordinary locations to provide for power as follows, a) Automatic transfer...

1 Scope 1.1 These requirements cover automatic, non-automatic, and manual transfer switches, operating at voltages of 1000 V ac and higher, and intended for use in ordinary locations to provide for power as follows: a)...

CSA intends to publish a national standard that will provide the foundation for a comprehensive Canadian Paramedic Information System (CPIS). This standard will be based on frameworks, common taxonomies and designs and...

These requirements cover electric operators for doors, draperies, gates, louvers, windows, exterior awnings and other opening and closing appliances rated 600 V or less to be employed in ordinary locations in accordance with...

CSA Group proposes to develop a national, consensus-based, voluntary standard for the provision of manual osteopathic care. The proposed scope of the standard is intended to specify requirements and recommendations for the...

1.1 These requirements cover automatic, non-automatic, and manual transfer switches, operating at voltages of greater than 1000 Vac, and intended for use in non-hazardous locations in accordance with Annex B, Item 1, the...