Norme sur les Raccords de Cheminée Préfabriquée et les Traversées Murales

Note 1: The  standard development activity for this NOI was updated by the responsible SDO on April 20, 2021.

Note 2 : Le champ de cet avis d’intention (publié pour la première fois le 16 mars 2021) a été mis à jour par l’OEN responsable le 27 juillet 2021. 

1.1 These requirements apply to factory-built chimney connectors and wall pass-through assemblies that do not require field fabrication.

1.2 The factory-built chimney connectors and wall pass-through assemblies are for use with gas, liquid and solid-fuel-fired residential appliances and building heating equipment where the flue-gas temperatures do not normally exceed 650 °C.

1.3 Factory- built chimney connectors are intended for use inside buildings to form a connection from an appliance to a factory-built chimney suitable for use with solid fuel, or to a masonry chimney.

1.4 The factory-built chimney connectors and wall pass-through assemblies covered by this Standard are intended for installation and use in accordance with the applicable Codes and Regulations as determined by the Authority Having Jurisdiction (AHJ), such as:

a) The National Building Code of Canada;

b) CSA B139 Series, Installation code for oil-burning equipment;

c) CAS B149 Series, Natural gas and propane installation code; and

d) CSA B365 Series, Installation code for solid-fuel-burning appliances and equipment.