Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-020: Exigences particulières pour centrifugeuses de laboratoire

This clause of Part 1 is applicable except as follows: 

1.1.1
Scope 
Replacement: 

This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES. 

This group safety publication is primarily intended to be used as a product safety standard for the products mentioned in the scope, but shall also be used by technical committees in the preparation of its publications for products similar to those mentioned in the scope of this standard, in accordance with the principles laid down in IEC Guide 104 and lSO/lEC Guide 51. 

NOTE If all or part of the equipment falls within the scope of one or more other Part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other Part 2 standards. 

1.1.2

Equipment excluded from scope 

Addition: 

Add the following new item: 

aa) IEC 60034 (Rotating electrical machinery);