Rechercher

1.1 This Standard covers the electrical and mechanical characteristics of (a) round 1350-H19 hard-drawn aluminum wires (A1) before compacting; (b) round zinc-coated hard-drawn steel core wires (S1A); and (c) bare compact...

1.1 This Standard applies to suspension and dead-end composite insulators used on ac overhead transmission lines with a nominal voltage greater than 75 kV and a frequency not greater than 100 Hz. 1.2 The objectives of this...

1.1 This Standard applies to (a) steam sterilizers that (i) have a chamber volume of 42.5 L (1.5 ft3) or greater; and (ii) are intended for use in health care facilities; (b) emergency (flash) sterilizers; and (c) washer...

1.1 This Standard provides a calculation method for determining the heat loss and heat gain of buildings (as described in Clause 1.3 below) for the purpose of selecting the appropriate output capacity of a space heating...

1.1 This Standard describes the requirements, including quality system requirements, for the O&M of an HCF. It sets out specific requirements for a) buildings and architectural systems; b) site elements related to the...

1.1 This Standard covers the electrical and mechanical characteristics of a)round 1350-H19 hard-drawn aluminum wires (A1) before compacting b)round zinc-coated hard-drawn steel core wires (S1A) and c)bare compact round...

1.1 This Standard specifies requirements for concentric-lay aluminum stranded conductors, with or without a central core of reinforcing steel strand. These conductors are intended for overhead installation on single-phase or...

1.1 This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, unsanded plywood, oriented...

Scope 1.1 This Standard specifies energy efficiency and performance requirements for LED luminaires of the directional and non-directional type used for general illumination, including those with a significant decorative...

1.1 This Standard provides criteria for the structural design and appraisal of structures or structural elements made from wood or wood products, including graded lumber, glued-laminated timber, unsanded plywood, oriented...

1.1 This Standard specifies requirements for pre-operational proof and leakage rate testing of concrete containment structures of a containment system that are designated as class containment components. Note: Other...

1.1 This Standard specifies the test method for measuring the energy performance and defines the performance requirements of displays with a viewable screen size greater than or equal to 75 cm (30 in) diagonal and televisions...