Rechercher

Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: This part of IEC 61010 specifies safety requirements for electrically powered laboratory equipment for the...

This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: This part of IEC 61010 specifies safety requirements for electrically powered laboratory equipment for the heating of...

This covers specific, defined abnormal conditions and fault tolerance related to anticipated firefighter operations that exceed the criteria of existing safety standards. Evaluation of equipment and systems for providing a...

These requirements cover portable and movable power packs provided with one or more batteries or electrochemical capacitor modules. If provided with a battery, the battery shall be either a lead acid or lithium ion battery...

The purpose of this proposal was to address numerous topics to update UL1191 to reflect current technologies, current practices, editorial revisions, and to better align with ISO 12402-7 to allow for possible future...

These requirements cover automatic sprinklers including conventional, spray, sidewall, extended coverage, residential, certain specific application sprinklers and storage sprinklers including early suppression fast response...

These requirements cover automatic sprinklers including conventional, spray, sidewall, extended coverage, residential, certain specific application sprinklers and storage sprinklers including early suppression fast response...

The requirements in this proposed new standard apply to ultraviolet germicidal irradiation equipment and systems emitting uncontained UV and intended for use in commercial and industrial environments and installed in...

Please note that the Title and Scope of this NOI was updated on September 12, 2017 as per a request from the responsible SDO. 1.1 These requirements cover the electrical system of unmanned aircraft systems (UASs), as defined...

These requirements cover short-term test procedures to be used for the evaluation of battery cell separators for use in lithium ion cells. These separators are intended to provide electrical insulation between the lithiumion...

This chapter introduces this Standard - the Open Trusted Technology Provider Standard (OTTPS) - and the normative terminology that should be understood in relation to specific requirements and recommendations found in Chapter...

1.1 These requirements apply to factory-built gas-fired package boilers having input ratings of more than 117,228 W (400,000 Btu/h), per individual combustion chamber, and intended primarily for commercial and industrial...