Rechercher

Basis for this method is the laboratory sample obtained by the method specified in ISO 948. The principle of determination consists in grinding the laboratory sample, which has been previously mixed, to obtain particles of the size specified in the International Standard appropriate to the spice or condiment concerned or, if not so specified, to obtain particles of size approximately 1 mm.

Basis for this method is the laboratory sample obtained by the method specified in ISO 948. The principle of determination consists in grinding the laboratory sample, which has been previously mixed, to obtain particles of the size specified in the International Standard appropriate to the spice or condiment concerned or, if not so specified, to obtain particles of size approximately 1 mm.

ISO 17892-4.2016 specifies a method of determining the particle size distribution of soils. ISO 17892-4.2016 is applicable to the laboratory determination of the particle size distribution of a soil test specimen by sieving, or sedimentation, or a combination of both within the scope of geotechnical investigations. The particle size distribution is one of the most important physical…

This document specifies requirements and gives recommendations for the handling, documentation and processing of urine, venous blood plasma and serum intended for metabolomics analysis in the pre-examination processes. This document is applicable to metabolomics examinations and can be used by biomedical laboratories, customers of laboratories, in vitro diagnostics developers and manufacturers,…

ISO 7138:2017 specifies laboratory measurement methods for mass and location of the balance point of cross-country skis. If laboratory measurement data are determined and published by manufacturers or other institutions, standard measurement procedures can be used to ensure comparability. ISO 7138:2017 is not the purpose of this document to evaluate the measurement data with regard to their…

ISO 16251-1:2014 specifies a laboratory measurement method to determine the improvement of impact sound insulation by a floor covering when laid on a standard concrete floor mock-up and excited by a standard tapping machine. The method is restricted to soft, flexible floor coverings, which transmit impact sound mainly "locally" into the floor, i.e. through the area close to the points…

The purpose of this document is to provide minimum criteria required for quality assurance and quality control, evaluation of the performance and to facilitate the comparison of measurements related to absorbed dose estimation obtained in different laboratories applying ex vivo X-band EPR spectroscopy with human tooth enamel. This document covers the determination of absorbed dose in tooth enamel…

ISO 10846-2:2008 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specified preload. The method concerns the laboratory measurement of vibrations on the input side and blocking output forces and is called “the direct method.” The method is applicable to test elements with parallel flanges (see Figure 1). Resilient elements, which are…

This part of ISO 10846 specifies a method for determining the dynamic transfer stiffness for translations of resilient supports, under specific preload. The method concerns the laboratory measurements of vibration transmissibility and is called the indirect method. This method is applicable to test elements with parallel flanges. Measurements for translations normal and transverse to the flanges…

This document specifies requirements and recommendations on the handling, storage, processing and documentation of saliva specimens intended for human DNA examination during the pre-examination phase before a molecular examination is performed. This document is applicable to molecular in vitro diagnostic examination including laboratory developed tests performed by medical laboratories. It can…