Rechercher

1 Scope 1.1 This Standard applies to the following products to be installed in accordance with the Canadian Electrical Code, Part I: a) cords and insulated conductors intended for decorative lighting and seasonal-use cord sets; and b) insulated conductors intended for internal wiring of electrical equipment, for leads of transformers, motors, etc., and for luminous-tube signs and ignition…

1 Scope 1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General…

1 Scope 1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General…

Scope Replacement: This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of both FIXED and MOBILE X-RAY EQUIPMENT declared by the MANUFACTURER to be suitable for RADIOSCOPICALLY GUIDED INTERVENTIONAL PROCEDURES, hereafter referred to as INTERVENTIONAL X-RAY EQUIPMENT. Its scope excludes, in particular: – equipment for RADIOTHERAPY; – equipment for COMPUTED TOMOGRAPHY; –…

1 Domaine d’application 1.1 Généralités Cette norme définit les valeurs de rendement énergétique pour les transformateurs de distribution à isolant liquide. La méthode du coût d’exploitation total (CET) est le moyen recommandé pour arriver à ces valeurs de rendement énergétique, particulièrement pour les services publics d’électricité. Cette norme définit aussi une méthode optimale pour les…

Domaine d’application Cette norme fournit les spécifications et les caractéristiques de fonctionnement des pilotes électroniques non intégrés (alimentations) pour les dispositifs, barrettes ou systèmes à DEL destinés aux applications d’éclairage général, y compris à l’intérieur et à l’extérieur, ainsi qu’à des cas spécifiques, tels que l’alimentation électrique par Ethernet (PoE) et les…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric pumps for liquids having a temperature not exceeding 90 °C, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 This Standard covers both permanently…

1 Scope This Standard specifies general and safety requirements for lamp controlgear designed to be installed on branch circuits not exceeding 600 V nominal between conductors and used in accordance with CSA C22.1, Canadian Electrical Code, Part I. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests.…

1 Domaine d’application 1.1 Inclusions Cette norme définit les exigences relatives à la performance, à l’installation et à l’application, ainsi qu’à la vérification de la performance des systèmes de ventilation mécanique. Cette norme s’applique aux systèmes pouvant fournir des débits contrôlés minimaux d’air neuf dans les espaces habitables des logements : a) qui entrent dans le domaine d’…