Rechercher

This National Standard of Canada is based on International Standard CEI/IEC 1029-1:1990. 1 Scope 1.1 This standard applies to electric motor-operated or magnetically-driven tools, intended for indoor and for outdoor use, which have all the following characteristics: a) easily moved by one person, simple devices to facilitate transportation may be incorporated, e.g. handles,…

This National Standard of Canada is based on International Standard CEI/IEC 1029-2-6:1993. 1 Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable diamond drills with water supply having a core bit diameter of not more than 250 mm. NOTE - For tools having core bits with a…

This National Standard of Canada is based on International Standard CEI/IEC 1029-2-7:1993. 1 Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable diamond saws with water supply and with a saw blade diameter of not more than 250 mm. NOTES 1. For tools having saw…

1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to room heaters for household and similar purposes. NOTES 1. Room heaters not intended for normal household use, but which nevertheless may be a source of danger to the public, such as heaters intended to be used by laymen in shops, in light industry and on farms, are within the…

1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to electrical instantaneous water heaters intended for heating water to a temperture below its boiling point. NOTES 1 Heating elements incorporated in instantaneous water heaters may be sheathed or bare. 2 Instantaneous water heaters not intended for…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-59:1990. 1. Scope This clause of Part 1 is applicable except as follows: 1.1 Replacement: This standard applies to electric insect killers for household and similar purposes. NOTES 1 This standard does not take into account the special hazards which…

1.1 This standard applies to asbestos-cement, nonpressure, large-diameter pipe (200 mm and up), suitable for conveying sanitary sewage to gravity-flow systems. 1.2 For cautionary notes on cutting, grinding, sanding or drilling of this product, see par. 6.2.2 and 8.3.

1.1 This standard applies to asbestos-cement pressure pipe suitable for conveying fluids under pressure. 1.2 For cautionary notes on cutting, sanding, grinding or drilling of this product, see par. 6.2.2 and 8.3.

1.1 This standard applies to flat low density asbestos sheets intended primarily for interior use, composed of a uniform mixture of asbestos fibres, with suitable inorganic binding agents and fillers, all the components being substantially insoluble in water. 1.2 For cautionary notes on the cutting, sanding or drilling of this product, see par. 3.5 and 7.3.

1.1 This standard applies to asbestos-cement drain and waste system pipe suitable for use above and below ground, inside buildings for drain, waste and vent systems and as rainwater leaders for roof drainage. This pipe is also known as asbestos-cement soil pipe. 1.2 For cautionary notes on the cutting, sanding, grinding or drilling of this product, see par. 6.2.2 and 8.3.