Rechercher

1. Scope 1.1 These requirements apply to the following stationary equipment for use in nonhazardous locations rated 7200 V or less, single- or 3-phase, and remote control assemblies for such equipment. (a) Heat pumps, for heating and cooling with or without factory or field-installed electric resistance heaters, or hot water or steam heating coils. (b) Air conditioners for cooling…

1.1 Scope 1.1.1 Equipment covered by this standard This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V and designed to be installed in accordance with the Canadian Electrical Code, Part 1, CSA C22.1; CSA C22.2 No.0; the National…

1. Scope 1.1 General This Standard applies to the commissioning of plumbing systems in health care facilities. It is a companion document to the other Standards in the CSA Z318 Series of Standards. 1.2 This Standard is intended to assist the commissioning team in the preparation of a commissioning plan to define commissioning requirements and project coordination for newly installed…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC TR 9577:1993. 1 Scope This Technical Report provides a) the description of a means to permit a protocol to be…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 9646-1:1994. 1 Scope 1.1 ISO/IEC 9646 is a multi-part International Standard which specifies a general methodology for…

This National Standard of Canada is equivalent to International Standard ISO/IEC 9646-2:1994. 1 Scope 1.1 This part of ISO/IEC 9646 specifies the requirements and gives guidance for the production of system-independent conformance test suites for one or more OSI specifications. In particular, it is applicable to the production of all OSI conformance testing specifications including all…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 9646-4:1994. 1 Scope This part of ISO/IEC 9646 specifies requirements and gives guidance concerning the realization of a…

The international community has decided to make this standard available only in the English language version. It has been adopted as a National Standard of Canada on this basis. This National Standard of Canada is equivalent to International Standard ISO/IEC 11573:1994. 1.1 Scope This International Standard contains requirements necessary for the synchronization of PISNs. Timing within a…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-61:1992. 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of thermal storage room heaters for household and similar purposes which are intended to heat the room in which they are located, their rated voltage being not more than 250 V for single-phase appliances and 480 V…

This National Standard of Canada is based on International Standard CEI/IEC 335-2-65:1993. 1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electrical air-cleaning appliances for household and similar purposes, their rated voltage being not more than 250 v for single-phase appliances and 480 V for other appliances. NOTE 1 - This standard…