1.1 These requirements cover the construction and performance, exclusive of performance during fire
tests, of portable water based agent fire extinguishers. These fire extinguishers are intended to be utilized
in accordance with the Standard for Portable Fire Extinguishers, NFPA 10 and with the National Fire Code
of Canada.
1.2 The requirements for performance during fire testing of water…
STANDARD FOR LINING SYSTEMS FOR NEW MASONRY CHIMNEYS
1.1 These requirements cover lining systems for new masonry chimneys.
1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating
equipment, where the flue gas temperatures normally do not exceed 650 °C. They are intended for use
in accordance with the National Building Code of Canada, CSA B139 – Installation Code for Oil Burning
Equipment, CSA…
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety ...
This is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools,
Transportable Tools And Lawn And Garden Machinery – Safety – Part 3-10: Particular Requirements for
Transportable Cut-Off Machines. It is the First edition of CAN/CSA-C22.2 No. 62841-3-10 and the First
edition of UL 62841-3-10.
This harmonized standard is based on IEC Publication 62841-3-10: First…
STANDARD FOR EMERGENCY BREAKAWAY FITTINGS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1.1 This Standard sets forth minimum requirements for emergency breakaway fittings intended only for
flammable and combustible liquid service.
1.2 An emergency breakaway fitting is intended for use with dispensing devices to allow separation of the
hose nozzle valve and/or hose from the dispenser and prevent loss of liquid in the event that the vehicle
drives away before the hose nozzle valve…
Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-0...
This is the second edition of CAN/CSA-C22.2 No. 61010-2-040, Safety requirements for electrical
equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for
sterilizers and washer-disinfectors used to treat medical materials, which is an adoption, with Canadian
deviations, of the identically titled IEC (International Electrotechnical Commission) Standard…
Safety of power converters for use in photovoltaic power systems — Part 1: General requirements
This is the first edition of CAN/CSA-C22.2 No. 62109-1, Safety of power converters for use in
photovoltaic power systems — Part 1: General requirements, which is an adoption, with Canadian
deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62109-1
(first edition, 2010-04). It is one in a series of Standards issued by CSA Group under Part II of the…
Safety of power converters for use in photovoltaic power systems — Part 2: Particular requirements f...
This is the first edition of CAN/CSA-C22.2 No. 62109-2, Safety of power converters for use in
photovoltaic power systems — Part 2: Particular requirements for inverters, which is an adoption, with
Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard
62109-2 (first edition, 2011-06). It is one in a series of Standards issued by CSA Group under…
1.1 The requirements of this Standard cover the design and construction of Type B (round or oval) and
Type BW Gas Vents.
1.2 Type B Gas Vents are intended for the venting of flue gases having temperatures not exceeding
245 °C, from gas fired appliances certified with draft hoods or diverters. Type B Gas Vents are also
intended for use with gas fired appliances, without draft hoods or…