Rechercher

1 Scope 1.1 General This Standard establishes the principles and practices of an environmental compliance audit. It is intended to provide a consistent framework and minimum requirements for conducting ECAs in order to ensure that the ECAs address regulatory and liability requirements, as well as site-specific requirements. 1.2 Application This Standard can be applied to any organization, its…

The purpose of this International Standard is to achieve a high degree of harmonization in reporting results of on-site recording, sampling, on-site sample analyses and laboratory analyses of soil samples. To this end, it provides instructions for correctly specifying the quantities and units used to express results of analyses, the methods used and their precision. This International Standard…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-1:1998, (second edition, 1998-06). 1 Scope and object 1.1 Scope This Particular Standard, with the inclusion of TYPE TESTS and SITE TESTS, applies respectively to the manufacture and some installation* aspects Of ELECTRON ACCELERATORS** - intended for RADIOTHERAPY in human medical practice,…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-11:1997, (second edition, 1997-08). 1 Scope and Object This clause of the General Standard applies as follows: 1.1 Scope Addition: aa) This Particular Standard specifies requirements for the safety of GAMMA BEAM THERAPY EQUIPMENT intended for RADIOTHERAPY in human medical practice and includes EQUIPMENT…

1. Scope 1.1 This Standard sets forth methods for both new installation and replacement installation of factory-assembled windows and exterior doors that are intended for vertical installation in small buildings primarily used for residential occupancy. 1.2 This Standard provides minimum requirements that will help to ensure the installation of windows in an effective manner, such…

Applies to electrical installations such as those of: a)residential premises b)commercial premises c)public premises d)industrial premises e)agricultural and horticultural premises f)prefabricated buildings g)caravans, caravan sites and similar sites h)construction sites, exhibitions, fairs and other temporary installations. i)marinas and pleasure craft Covers: a)circuits supplied at nominal…

1. Scope 1.1 General This Standard outlines the minimum requirements for materials, products, equipment, and workmanship needed to ensure that park model trailers will provide adequate (a) structural strength and rigidty; (b) protection against corrosion, decay, insects, and other similar destructive forces; (c) protection against the hazards of fire; (d) resistance to the elements…

1. Scope Z241.0 1.1 This Standard provides the definition of the term park model trailer as used in the CAN/CSA-Z241 Series, Park Model Trailers. It also gives general safety requirements that apply to the other Standards in the CAN/CSA-Z241 Series. Z241.1 1.1 Requirement Specification This Standard specifies vehicular requirements for park model trailers including minimum…

1. Scope 1.1 This Standard provides recommended practices and procedures, and outlines the required specifications for the installation of wind energy conversion systems. 1.2 This Standard is intended to be used in conjunction with other relevant CSA Standards and with manufacturers' instructions, drawings, and specifications in order to ensure the safety of installers and the…

1. Scope 1.1 This Standard specifies a set of technical requirements and test methods for solar collectors and covers component materials, materials performance, operating performance, and marking requirements. 1.2 This Standard applies to solar collectors used for conver ting solar radiation into thermal energy. It covers only collectors with an aperture area of not less than 0.5 m²…