Rechercher

Specifies three methods for measuring the deposition rates of sulfur dioxide and air-borne salinity. Does not cover concentration measurements. Includes measuring methods which apply for characterization of corrosivity of the test site.

La présente Norme internationale prescrit des valeurs de référence pour les caractéristiques de corrosion pour les diverses classes de corrisivité définies dans l'ISO 9223. Ces valeurs de référence correspondent aux vitesses de corrosion de matériaux de construction et peuvent être utilisées dans les calculs de conception. Elles indiquent le contenu technique des diverses classes de…

Describes requirements for test specimens, test sites and their characterization, operating conditions, test procedures and the test report.

1 PURPOSE The purpose of this standard is to determine the requirements in respect of the dimensions, characteristics and test methods used for the inspection of kitchen cabinets and bathroom vanities. 2 SCOPE This standard applies to kitchen cabinets and bathroom vanities made of solid wood, compressed particles or other materials, manufactured on a modular basis or to…

This National Standard of Canada is equivalent to International Standard IEC CISPR 11:1990. 1.1 The limits and methods of measurement laid down in this publication apply to industrial, scientific and medical (ISM) equipment as defined in Clause 2, and to spark erosion equipment. 1.2 The assessment of conformity of equipment tested on a test site shall be in accordance with the…

La présente partie de l'ISO 5006 prescrit une méthode d'essai statique permettant de déterminer l'effet de masquage produit par des éléments de l'engin de base et de son équipement, tel qu'indiqué par le constructeur sur un cercle d'essai de visibilité tracé autour de l'engin à partir du point marquant l'emplacement des yeux d'un conducteur assis. Elle…

1. Scope 1.1 This Standard outlines the requirements for seismic instrumentation systems for nuclear power plants where site- specific seismic responses are required to be determined and recorded.

1. Scope 1.1 Except as stated in Clause 1.3, this Standard covers requirements for the installation of, alteration to, addition to, and provisions for maintenance of solid-fuel-burning appliances and equipment intended to supply heat to air or water. Note: Recommendations for the storage of solid fuel and of ash are included in Appendix A. 1.2 For the purpose of this Standard, solid…