Rechercher

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements to equipment for measuring insulation resistance and to equipment for testing electric strength which have an output voltage exceeding 50 V a.c. or 120 V d.…

This document provides an overview of the validation of air quality measurement methods in the standardization process. This document deals with robustness testing and interlaboratory testing as the two main steps of partial and full validation. It applies to the different inter-related elements of air quality measurement methods, covering e.g. sampling, sample preparation, storage and…

1 Scope 1.1 Safety guidance for use of energy-based medical and surgical devices This Standard presents guidance to ensure the safety of persons at risk in locations where energy-based medical and surgical devices are used. This includes but is not limited to guidance on purchasing, education, training, installation, use, servicing, maintenance, engineering and administrative controls, and…

IEC 60335-2-34:2024 EXV contains both the international standard and its extended version (EXV). This extended version of the official IEC Standard is available in English only and provides the user with a comprehensive content of the Standard. IEC 60335-2-34:2024 EXV includes the content of the references made to IEC 60335-1:2020. IEC 60335-2-34:2024 deals with the safety of sealed (hermetic…

This pack contains IEC 60335-2-34:2024 EXV and IEC 60355-2-34:2024 CMV. IEC 60335-2-34:2024 deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors…

IEC 60335-2-34:2024 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60335-2-34:2024 edition 7.0 and the previous IEC 60335-2-34:2021 edition 6.0. Furthermore, comments from IEC SC 61C experts are provided to explain the reasons of the most relevant changes, or to clarify any part…

IEC 60335-2-34:2024 deals with the safety of sealed (hermetic and semi-hermetic type) motor-compressors, their protection and control systems, if any, which are intended for use in equipment for household and similar purposes and which conform with the standards applicable to such equipment. It applies to motor-compressors tested separately, under the most severe conditions that can be expected…

This document specifies dynamic dummies used as replacements for participants in vibration tests of vehicle seats in laboratory. This document is applicable to seats installed in earth-moving machinery, agricultural wheeled tractors, and industrial trucks. This document specifies technical requirements, acceptance criteria, and a validation test for dynamic dummies representing the human body in…

This document specifies requirements and gives recommendations on the handling, storage, CTC enrichment, preparation for CTC staining, and documentation of venous whole blood specimens intended for staining of CTCs during the pre-examination phase before an examination is performed. This document is applicable to molecular in vitro diagnostic examinations including laboratory developed tests…

IEC 62052-31:2024 specifies general safety requirements and associated tests, with their appropriate conditions for type testing of directly connected, transformer-operated or transducer-operated AC and DC electricity meters and load control equipment. This document applies to electricity metering equipment designed to: • measure and control electrical energy on electrical networks (mains) with…