1 Scope
1.1 Purpose
This Standard establishes minimum requirements for electrical work and electrical equipment operating,
or intended to operate, in mines.
Note: Users should be aware that federal, provincial, and territorial legislation can impose additional requirements.
1.2 Application
This Standard is intended to be used with the requirements of the Canadian Electrical Code, Part I, or…
Tractors and machinery for agriculture and forestry — Serial control and communications data network...
ISO 11783 as a whole specifies a serial data network for control and communications on forestry or agricultural tractors and mounted, semi-mounted, towed or self-propelled implements. Its purpose is to standardize the method and format of transfer of data between sensors, actuators, control elements and information storage and display units, whether mounted on, or part of, the tractor or…
Dynamic modules - Part 2: Reliability qualification
IEC 62343-2:2011 applies to dynamic modules and devices (DMs) which are commercially available. Examples are tuneable chromatic dispersion compensators, reconfigurable optical cross-connects, and dynamic channel equalizers. (Optical amplifiers are not included in this list, but are treated in IEC 61291-5-2). For reliability qualification purposes, some information about the internal components,…
ISO/IEC 24727 is a set of programming interfaces for interactions between integrated circuit cards and external applications to include generic services for multi-sector use.
ISO/IEC 24727-5:2011 specifies conformance testing procedures designed to determine if interfaces developed with the ISO/IEC 24727 series meet the requirement of ISO/IEC 24727. By conforming to ISO/IEC 24727-5:2011,…
ISO/IEC 24727 is a set of programming interfaces for interactions between integrated circuit cards and external applications to include generic services for multi-sector use.
ISO/IEC 24727-5:2011 specifies conformance testing procedures designed to determine if interfaces developed with the ISO/IEC 24727 series meet the requirement of ISO/IEC 24727. By conforming to ISO/IEC 24727-5:2011,…
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirem...
IEC 62040-3:2011 applies to movable, stationary and fixed electronic uninterruptible power systems (UPS) that deliver single or three phase fixed frequency a.c. output voltage not exceeding 1 000 V a.c. and that incorporate an energy storage system, generally connected through a d.c. link. This standard is intended to specify performance and test requirements of a complete UPS and not of…
Alimentations sans interruption (ASI) - Partie 3: Méthode de spécification des performances et exige...
La CEI 62040-3:2011 s'applique aux systèmes d'alimentation sans interruption (ASI) électroniques mobiles, immobiles et fixes, qui délivrent une tension de sortie alternative à fréquence fixe mono- ou triphasée ne dépassant pas 1 000 V en courant alternatif et qui possèdent un moyen d'accumulation d'énergie généralement connecté via une liaison à courant continu. La présente…
Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage po...
IEC 61643-11:2011 is applicable to devices for surge protection against indirect and direct effects of lightning or other transient overvoltages. These devices are packaged to be connected to 50/60 Hz a.c. power circuits, and equipment rated up to 1 000 V r.m.s. Performance characteristics, standard methods for testing and ratings are established. These devices contain at least one nonlinear…
Parafoudres basse tension - Partie 11: Parafoudres connectés aux systèmes basse tension - Exigences ...
La CEI 61643-11:2011 est applicable aux dispositifs de protection contre les effets indirects et directs de la foudre ou contre les surtensions transitoires. Ces dispositifs sont conçus pour être connectés à des circuits sous tension alternative 50/60 Hz et à des équipements de tension assignée efficace allant jusqu'à 1 000 V efficace. Sont définies les caractéristiques de fonctionnement,…
