Rechercher

ISO/IEC 13346 specifies a format and associated system requirements for volume and boot block recognition, volume structure, file structure and record structure for the interchange of information on media between users of information processing systems. The media shall be recorded as if the recording of sectors may be done in any order. Note 1 - The medium is not restricted to being of only one…

1.1 Scope NOTE - See the rationale in annex M. This part of ISO 10651 is one of a series of International Standards based on IEC 601-1:1988 (the "General Standard"): this type of International Standard is referred to as a "Particular Standard". As stated in 1.3 of IEC 601-1:1988, the requirements of this part of ISO 10651 take precedence over those of IEc 601-1:1988…

1. Scope 1.1 This Standard describes requirements and test methods for materials, dimensions, quality of work, pipe stiffness, quality control, joining systems, and marking for SDR 28, 35, and 41 Type PSM PVC sewer pipe and fittings. Note: Industrial waste disposal lines should be installed only with specific approval of the regulatory authority, since chemicals not commonly found in…

1. Scope Note: Pipe made to this Standard should not be used in the production of fabricated fittings, due to the lack of field data. 1.1 This Standard describes requirements and test methods for materials, dimensions, quality of work, pipe stiffness, quality control, jointing systems, and marking for SDR 28, 35, and 41 multilayer PVC sewer pipe (PSM type). Note: Industrial waste…

This International Standard specifies a method for the determination of the thickness loss of textile floor coverings under dynamic loading. It is applicable to all types of textile floor coverings with a surface that is level in height and construction. It does not apply to other textile floor coverings unless the areas of different thickness or construction can be tested separately.

Defines the standard interface dimensions for the type FC-PC family of connectors. The parent connector for type FC connector family is a single position plug connector set of plug/adapter configuration which is characterised by a 2,5 mm nominal ferrule diameter. It includes a thread coupling mechanism, which is spring loaded relative to the ferrule in the direction of the optical axis. The plug…

La présente Norme internationale spécifie deux méthodes pour la préparation des feuilles de laboratoire, avant lemesurage du facteur de réflectance diffuse dans le bleu (degré de blancheur ISO). La méthode traditionnelle estbasée sur la préparation de feuilles d’essai dans un entonnoir Büchner en utilisant un papier-filtre ou une toile. Dansl’autre méthode, les feuilles d’essai sont préparées…

This International Standard specifies requirements, test methods, and marking, labelling and packaging, as appropriate,of both permanent and temporary single-point anchor devices exclusively for the attachment of personalprotective equipment (PPE) for protection against falls from a height for fall arrest, work positioning and travelrestriction (work restraint).It is applicable only to anchor…

This International Standard specifies two procedures for the preparation of laboratory sheets prior to measuring thediffuse blue reflectance factor (ISO brightness). One is the traditional procedure based on preparation of sheets in aBüchner funnel using a filter paper or a wire screen. ln the other procedure, the sheets are prepared in a standardsheet former (conventional or Rapid Köthen).…

La présente partie de l'ISO 5267 spécifie une méthode de détermination de l'égouttabilité d'une suspension aqueuse de pâte en fonction de l'indice Schopper-Riegler (SR). L'essai Schopper-Riegler est conçu pour donner la mesure de la vitesse à laquelle l'eau peut être extraite d'une suspension de pâte diluée. Il a été démontré que l'égouttabilité est…