Rechercher

This document specifies test procedures and a method of presenting the results concerning the parameters which define the main characteristics to be included in the literature from suppliers of regulators and filter-regulators conforming to ISO 6953-1. The purpose of this document is to: —    facilitate the comparison of pressure regulators and filter-regulators by standardizing test methods and…

Scope This National Standard of Canada defines equipment requirements, performance criteria, and operating and testing procedures for the implementation of a vapour control system (VCS) in gasoline distribution networks including terminals, bulk plants, service stations and cargo tanks, commonly known as Stage I controls (see Figure 1 for a schematic representation). This standard does not…

Objet La présente Norme nationale du Canada définit les exigences relatives à l’équipement, aux critères de rendement, à la procédure à suivre et aux méthodes d’essai pour la mise en place de systèmes de récupération des vapeurs (SRV) dans les réseaux de distribution d’essence comprenant des terminaux, des dépôts routiers, des stations-service et des camions-citernes qui sont couramment…

1 Scope 1.1 Installation requirements for large oil-burning equipment This Code specifies minimum requirements for the installation of large oil-burning equipment. Note: The intent of this Code is to apply to multi-unit residential, commercial, institutional, and industrial buildings in accordance with the provincial building code or, in the absence of such regulation, the National Building…

1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric pumps for liquids having a temperature not exceeding 90 °C, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 This Standard covers both permanently…

1 Scope This Standard specifies general and safety requirements for lamp controlgear designed to be installed on branch circuits not exceeding 600 V nominal between conductors and used in accordance with CSA C22.1, Canadian Electrical Code, Part I. This standard also covers lamp controlgear for lamps which are not yet standardized. Tests dealt with in this standard are type tests.…

IEC 60601-2-35:2020+AMD1:2023 CSV applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of HEATING DEVICES using BLANKETS, PADS or MATTRESSES in medical use, also referred to as ME EQUIPMENT. HEATING DEVICES intended to prewarm a bed are included in the scope of this document. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title…

This document defines the acoustic performance of four classes (Classes A, B, C and D) of pipe insulation. It also defines a standardized test method for measuring the acoustic performance of any type of material system construction, thereby allowing existing and new insulation constructions to be rated against the four classes. Furthermore, this document presents some typical types of…

IEC 60335-2-60:2023 deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances. This standard also applies to appliances for circulating air or water in…

This pack contains IEC 60335-2-60:2023 EXV and IEC 60355-2-60:2023 CMV. IEC 60335-2-60:2023 deals with the safety of electric whirlpool baths for indoor use and whirlpool spas, for household and similar use, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances, including direct current (DC) supplied appliances and battery-operated appliances…