1 Scope
1.1
This Standard sets forth characteristics of effective and durable installation methods, in both new and existing buildings, of fenestration products within the scope of AAMA/WDMA/CSA 101/I.S.2/A440 that are intended for installation in buildings of all occupancies to which NBC Parts 3, 4, 5, and 6 of Division B apply.
1.2
In addition to fenestration products within the scope of…
1 Scope
1.1
This Standard specifies mechanical and electrical requirements for dispensers of compressed hydrogen gas intended for fuel storage systems integral to fuel cell vehicles at pressures of 25, 35, 50, and 70 MPa.
Dispensing systems covered by this Standard include
a)
HGV dispensers that integrate all dispensing system components in a single unit, including fuel metering and…
1 Scope
1.1
This Standard specifies the design, installation, operation, and maintenance of site-built and modular gaseous hydrogen fuelling stations (HFS) intended to fuel on-road vehicles.
1.2
Unless otherwise stated, the standard conditions are as follows: temperature 15 °C and pressure 101 kPa.
1.3
In case of conflict between this Standard and federal, provincial, state, or local…
Household and similar electrical appliances — Safety — Part 2-37: Particular requirements for commer...
Scope
This clause of Part 1 is replaced by the following.
This international Standard deals with the safety of electrically operated commercial deep fat
fryers and doughnut fryers including pressurized types with a pressure not exceeding
50 kPa and a pressure volume litres product of 200. These appliances are not intended for
household and similar use, their rated voltage being not more…
Safety of transformers, reactors, power supply units and similar products for supply voltages up to ...
1 Scope
Replacement:
This International Standard deals with all aspects of safety such as electrical, thermal and mechanical.
This part 2-13 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled (natural or forced), independent or associated auto-transformers, having a rated supply voltage not exceeding 1 000 V a.c., a rated frequency not exceeding 500 Hz…
Safety of transformers, reactors, power supply units and similar products for supply voltages up to...
1 Scope
Replacement:
This part of IEC 61558 deals with the safety of isolating transformers for general
applications and power supply units incorporating isolating transformers for general
applications. Transformers incorporating electronic circuits are also covered by this
standard.
NOTE 1 Safety includes electrical, thermal and mechanical aspects.
Unless otherwise specified, from here…
Safety of transformers, reactors, power supply units and similar products for supply voltages up to ...
1 Scope
Replacement:
This part of IEC 61558 deals with the safety of safety isolating transformers for general
applications and power supply units incorporating safety isolating transformers for
general applications. Transformers incorporating electronic circuits are also covered by this
standard.
NOTE 1 Safety includes electrical, thermal and mechanical aspects.
Unless otherwise specified…
1 Scope
1.1
This Standard provides management requirements for facilities that collect, process, store, and use human blood components for transfusion. It addresses issues of safety, efficacy, and quality for recipients, safety of donors, management of blood components, and safety of facility personnel and others who are exposed to or potentially affected by blood components.
1.2
This…
Robotics — Application of ISO 13482 — Part 1: Safety-related test methods
This document describes methods that can be used to test personal care robots in terms of safety requirements defined in ISO 13482. The target robots of this document are identical to those of ISO 13482.
The manufacturer determines the required tests and appropriate testing parameters based on a risk assessment of the robot's design and usage. This risk assessment can determine that tests…
1 Domaine d’application
1.1 Ces exigences s’appliquent aux systèmes de stockage de l’énergie (ESS) destinés à recevoir de
l’énergie et à l’emmagasiner sous une forme qui peut approvisionner en énergie électrique, selon la
nécessité, des charges ou le système d’alimentation électrique (EPS) local/d’un secteur. La présente
norme traite des modes de stockage de l’énergie suivants :…