Road vehicles — Communication between vehicle and external equipment for emissions-related diagnosti...
ISO 15031-4:2014 specifies a set of standard diagnostic services to be provided by vehicles (OBD services). ISO 15031-4:2014 specifies a complementary set of facilities, to be provided by external test equipment, which will include scan tool facilities. These facilities provide complete, efficient, and safe access to all of the public OBD (on-board diagnosis) services on any vehicle, which is…
Robots and robotic devices — Safety requirements for personal care robots
ISO 13482:2014 specifies requirements and guidelines for the inherently safe design, protective measures, and information for use of personal care robots, in particular the following three types of personal care robots:
mobile servant robot;
physical assistant robot;
person carrier robot.
These robots typically perform tasks to improve the quality of life of intended users, irrespective of age…
Assembly tools for screws and nuts — Machine-operated screwdriver bits — Part 3: Screwdriver bits fo...
ISO 2351-3:2014 prescribes the technical specifications for machine-operated screwdriver bits for hexagon socket screws, listed in ISO 1703 under reference number 3 2 03 01 0. It applies to bits with male hexagon drive or with cylindrical flat-end drive as defined in ISO 1173 and to tips for screwdrivers as defined in ISO 2936. It also gives recommended combinations between tips and bits.
Filler metals and allied materials for metal arc welding
Scope
1.1
This Standard specifies requirements for the classification and certification of
a) carbon steel covered electrodes for shielded metal arc welding (SMAW);
b) chromium and chromium-nickel steel covered electrodes for SMAW, including electrodes designated for welding heat-resistant steels containing more than 11% chromium and less than 50% nickel;
c) low alloy steel covered…
Scope
1.1
This Standard specifies technical requirements for the design, construction, testing, inspection, and performance of relocatable above-ground collapsible fabric storage tanks (bladders) intended for the storage of petroleum products and allied petroleum products with a relative density not greater than 1.
1.2
This Standard applies to bladders that are shop-fabricated from reinforced…
Asphalt shingle application on roof slopes 1:6 and steeper
Scope
1.1
This Standard provides minimum requirements for the application of asphalt shingles on roofs with a slope of 1:6 and steeper.
Portions of this Standard may not apply to laminated and/or dimensional shingles. The manufacturers of these shingles should be consulted for specific installation instructions.
Note: Annex A is included to provide recommendations for acceptable…
Scope
1.1
This Standard specifies the energy performance test method for room air conditioners and specifies minimum efficiency levels.
1.2
This Standard covers room air conditioners powered by a single-phase electric current and rated at 10.55 kW (36 000 Btu/h) cooling capacity and below at standard rating conditions.
1.3
This Standard does not apply to the rating and testing of individual…
Scope
1.1
This Standard specifies the requirements for all self-retracting devices (SRDs) used as connecting components in fall protection systems. SRDs are further classified in this Standard according to method of use.
1.2
The equipment specified in this Standard is intended for users at risk of falls from height while at work.
1.3
This Standard outlines requirements for labeling products…
1 Scope
1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance:
a) Installation of Smoke Alarms, CAN/ULC-S553;
b) National Building Code of Canada; and
c) National Fire Code of Canada.
1.2 A single station smoke alarm (e.g. ionization-type, photoelectric-type, smoke alarm with…
Plumbing fixtures with pumped waste and macerating toilet systems
Scope
1.1
This Standard establishes physical, performance, and testing requirements applicable to plumbing fixtures with pumped waste, macerating toilet systems, and related components. Such systems are intended to collect waste from a single fixture such as a water closet, lavatory, shower, or bathtub and pump these wastes to some point in the sanitary drainage system.
1.2
The purpose of…