Rechercher

1.1 General 1.1.1 This Standard applies to mast-climbing transport platforms (MCTPs) that are considered tools of the trade and are used to vertically transport material and authorized persons to specified access levels on a structure during construction, renovation, maintenance, and related activities. The platform operates at a limited speed and minimum safe distance from the structure. This…

1.1 This Standard specifies requirements for photovoltaic (PV) rapid shutdown systems (PVRSS) and PV rapid shutdown equipment (PVRSE) intended to be used in ordinary locations in accordance with CSA C22.1, Canadian Electrical Code, Part I (CE Code, Part I) and rated 1500 V or less. A PVRSS is an integrated set of discrete components that work together to shut down one or more PV arrays installed…

1.1 General This Standard specifies a test method for calculating the energy performance of external power supplies (EPS) across a full range of load conditions. It covers single-voltage and multiple-voltage external ac-dc and ac-ac power supplies. Note: External power supplies are designed to convert line voltage ac into the low-voltage output (ac or dc) typically required by laptop computers,…

1.1 General This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or existing dc sources (such as automotive power jacks or USB ports). Uninterruptible power supplies that utilize the standardized National Electrical Manufacturer Association…

This Standard applies to newly produced gas-fired low-pressure steam and hot water boilers with gas inlet pressure ratings not exceeding 0.5 psi (3.5 kPa) and having input ratings of less than 12,500,000 Btu/hr (3 663 389 W) (see Clause 3, Definitions), hereinafter referred to as boilers*, constructed entirely of new unused parts and materials, for operation at or below the following pressures…

1.1 1.1.1 This Standard establishes requirements for the planning, design, implementation, maintenance, evaluation, and continual improvement of wayfinding systems for HCFs. 1.1.2 This Standard addresses the following components of wayfinding as a user experience, a process, a plan, and a system: a) place; b) people; c) elements; and d) continual improvement. 1.2 This Standard sets…

1 Scope 1.1 This Standard specifies requirements for the safe installation and operation of hemodialysis and peritoneal dialysis performed in a home setting. It is intended for use by dialysis providers, including health care workers and professionals who perform technical and operational functions associated with home dialysis, as well as stakeholders who have an interest in safety or related…

1.1 This Standard is intended to form the basis of a QMS within a health care or home setting for the purpose of providing safe, reliable kidney dialysis treatments. Note: A comprehensive QMS can be achieved when this Standard is used in combination with the following related Standards: a) CAN/CSA-C22.2 No. 60601-1; b) CAN/CSA-C22.2 No. 60601-2-16; c) CAN/CSA-C22.2 No. 60601-2-39; d)…

1.1 This Standard applies to lifts and accessories used to transfer persons, specifically by suspending from above or supporting from below, between beds, chairs, stretchers, bathtubs, or other similar resting places or standing. This Standard applies to fixed and mobile lifts, lifting arm- or rail-mounted, including lifts often referred to as ceiling-lifts, portable-lifts, floor-lifts, sit-to-…

verification, for all types and sizes of mobile elevating work platforms (MEWPs) intended for moving persons to working positions. It gives the structural design calculations and stability criteria, construction, safety examinations and security tests to be applied before a MEWP is first put into service, identifies the hazards arising from the use of MEWPs and describes methods for the…