Rechercher

1.1        This document is intended to be used to assign part classifications across the aviation industries that use AM to produce parts. 1.2        This document is applicable to all AM technologies defined in ISO/ASTM 52900 used in aviation. 1.3        This document is intended to be used to establish a metric for AM parts in downstream documents. 1.4        This document is not intended to…

This document defines terms relating to the mechanical aspects of portable chain-saws, saw-chain and guide bars. The chain-saw positions are shown in Annex A, Figure A.1.

This document provides a specification for associating the processes of ISO/IEC TS 33073 with the process attribute outcomes of ISO/IEC 33020 with the intent of demonstrating support for levels 1 to 3 of the process capability measurement scale defined in ISO/IEC 33020.

This document provides a specification for associating the life cycle processes of ISO/IEC/IEEE 12207 with the process attribute outcomes of ISO/IEC 33020 with the intent of demonstrating support for levels 1 to 3 of the process capability measurement scale defined in ISO/IEC 33020.

This document specifies the principles of particle size analysis by centrifugal liquid sedimentation (CLS). It also: — defines the relevant terms; — describes the various measurement techniques; — gives guidance for sample preparation, conducting measurements as well as data analysis; — establishes rules for method validation, determination of the uncertainty budget as well as representation of…

1 Scope 1.1 Inclusions This Code specifies minimum requirements for the design, construction, installation, operation, inspection, testing, alteration, and maintenance of permanently installed manlifts for the vertical or inclined vertical transportation of authorized personnel and, where authorized, their tools and equipment. Such manlifts are typically installed in grain elevators, radio…

1 Scope 1.1 General This Code specifies minimum requirements for the design, construction, installation, and operation of platform lifts and stair lifts that provide barrier-free access for persons with limited mobility, travelling between fixed points of a building or structure, including a private residence, with a view to safeguarding against risk of accidents associated with the operation…

1 Scope 1.1 Inclusions The requirements specified in this Standard apply to wall and ceiling-mounted track lighting systems intended to be installed in non-hazardous dry locations in accordance with the Canadian Electrical Code, Part I. These requirements apply to a) permanently installed track systems i) rated 347 V or less, 40 A max; ii) supplied by a power source with an output of 30…

1 Scope 1.1 Inclusions This Standard is intended for refrigerated facilities with the following characteristics: a) refrigerated storage and refrigerated processing facilities for food and beverage products; b) vapour-compression cycle and providing cooling by convection or conduction; c) refrigerated zone volume equal to or greater than 283 m3 (10,000 ft3); and d) greater than 50% of…

Scope This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum pressure rating of 2 000 kPA (20 bar) and equipment for general household and similar use including controls for heating, air-conditioning and similar applications. NOTE Examples are water flow and water level…