Rechercher

1 Scope 1.1 General This Standard contains requirements for the material, design, manufacture, marking, and testing of serially produced, refillable Type HGV 2 containers intended only for the storage of compressed hydrogen gas for on-road vehicle operation. These containers a) are to be permanently attached to the vehicle; b) have a capacity of up to 1000 L (35.4 ft3) water capacity; and…

1 Scope 1.1 General This Standard applies to water pressure reducing valve for potable water distribution systems. The purpose of a water pressure reducing valve for potable water distribution systems (herein referred to as the “device”) is to reduce static and flowing pressures in water distribution systems. 1.2 Sizes This standard applies to nominal device sizes of 1/2, 3/4, 1, 1-1/4, 1-1/2…

1 Scope 1.1 General This Standard provides minimum requirements for the development and reporting of a natural asset inventory, which is the first step towards natural asset management. This Standard is designed to be sufficiently flexible that it can be applied in any jurisdictional context. It can also be used to include not only natural assets within a given jurisdictional boundary but also…

1 Scope 1.1 There is a commentary available for this Clause. This Standard covers the design, construction, operation, maintenance, deactivation, and abandonment of oil and gas industry pipeline systems that convey a) liquid hydrocarbons, including crude oil, multiphase fluids, condensate, liquid petroleum products, natural gas liquids, and liquefied petroleum gas; b) oilfield water; c)…

1 Scope and normative references This clause of Part 12 is applicable except as follows: 1.1 Replacement: This part of IEC 60730 applies to the partial evaluation of thermal motor protectors as defined in IEC 60730-1 for household and similar use, including heating, air conditioning and similar applications as well as for sealed (hermetic and semi-hermetic type) motorcompressors. NOTE A…

This Part 1 of IEC 60598 specifies general requirements for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this document cover: classification, marking, mechanical construction, electrical construction and photobiological safety. Each section of this Part 1 is read in conjunction with this Section 0…

This document specifies a method for determining the Charpy impact strength of plastics under defined conditions. A number of different types of specimen and test configurations are defined. Different test parameters are specified according to the type of material, the type of test specimen and the type of notch. The method can be used to investigate the behaviour of specified types of specimen…

This document specifies the fundamental principles governing coded domains, identification and description of the coded domains from the BOV view, the rules governing the rule-base of coded domains, the rules for management of ID codes, rules for specifying Human Interface Equivalents (HIEs) to an ID Code, the relations between the coded domain and controlled vocabularies, the rules governing the…

1 Scope 1.1 Inclusions This Standard applies to structures and hoists that are not a permanent part of buildings, structures, or other works, and that are used during construction, alteration, or demolition to raise and lower persons and/or materials connected with or related to a building project. This Standard covers the design, construction, installation, maintenance, operation, and…

Scope This Standard applies to ME EQUIPMENT and ME SYSTEMS that are intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT INCUBATORS, as defined in 201.3.209, also referred to as ME EQUIPMENT. If a clause or subclause is specifically intended to be applicable to…