Rechercher

1. Scope 1.1 Areas 1.1.1 This Standard applies within (a) patient care areas of hospitals; and (b) areas or spaces outside of hospitals which are intended to be used to provide patient diagnosis, treatment, or care, involving intentional electrical contact of any kind between the patient and medical electrical equipment. 1.1.2 This Standard does not apply to veterinary facilities,…

1. Scope 1.1 This Standard applies to household coking ranges having a rating not exceeding 250 V and 21kW and designed to be used in accordance with the Rules of the Canadian Electrical Code, Part 1. Note: Throughout this Standard the word appliance(s) is used to refer to the whole group of equipment covered by the Standard. Where a requirement applies only to one type of equipment, eg,…

Cette Norme internationale donne les spécifications des rayonnements neutroniques de référence, dans le domaine d'énergie depuis les «thermiques» jusqu'à 20 MeV, destinés à l'étalonnage des instruments de mesure des neutrons utilisés en radioprotection ainsi qu'à la détermination de la variation de leur réponse en fonction de l'énergie des neutrons. Les…

1. Scope Note: This Preliminary Standard has been prepared primarily for critical review and is subject to change prior to publication as a formal Standard. 1.1 This Standard provides requirements for material selection, design, and construction of fixed concrete offshore structures. It is intended for use by engineers experienced in the design and construction of offshore structures.

1. SCOPE 1.1 This standard applies to flat sheets composed of a uniform mixture of Portland cement and asbestos fibre, with or without the addition of curing agents, pigments, coatings, mineral granules or mineral fillers, intended for industrial, commercial and general building purposes. 1.2 For cautionary notes on the use of this product, see par. 3.3 and 7.3. 1.3 This standard…

Applicable to the inspection of tubes with an outside diameter greater than or equal to 9 mm. Specifies general requirements, method of test, reference standards, reference notches, equipment calibration and checking, acceptance and test report. Annex A gives notes on limitations of the magnetic transducer/flux leakage technique.

This National Standard of Canada is equivalent to International Standards ISO 8879-1986 and ISO 9069-1988. 1 Scope This International Standard: (a) Specifies an abstract syntax known as the Standard Generalized Markup Language (SGML). The language expresses the description of a document's structure and other attributes, as well as other information that makes the markup…

Is applicable to the inspection of tubes with an outside diameter greater than or equal to 4 mm and includes two different acceptance levels. Specifies general requirements, method of test, reference standards, reference notch, equipment calibration and checking, acceptance and test report. Annex A contains notes on limitations of the eddy current test method.

Applicable to the inspection of tubes with an outside diameter greater than or equal to 9 mm. Specifies general requirements, method of test, reference standards, reference notches, equipment calibration and checking, acceptance and test report. Annex A gives notes on limitations of the magnetic transducer/flux leakage technique.

1. Scope 1.1 This Standard applies to heat tracing cables, heat tracing cable sets, and their related components that are intended (a) to provide supplemental heat to maintain or raise the temperature of a pipe, vessel, instrument, or related equipment; (b) for permanent installation in Class I, Groups A, B, C, and D, Divisions 1 and 2; Class II, Groups E, F, and G, Divisions 1 and…