1 Scope
[Add the following]
The requirements of the IEC 60079 series of Standards cover protection techniques with respect to
explosion hazard only. The CAN/CSA-C22.2 No. 60079 series of Standards (based on the adoption of the
corresponding IEC Standards) is to be used in conjunction with other applicable Standards containing the
appropriate electrical safety requirements for general-use…
Identification cards — Test methods — Part 5: Optical memory cards
ISO/IEC 10373-5:2014 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification cards applications.
NOTE 1 Criteria for…
Identification cards - Test methods - Part 5: Optical memory cards
ISO/IEC 10373-5:2014 defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification cards applications.
NOTE 1 Criteria for…
Fixed capacitors for use in electronic equipment — Part 14: Sectional specification — Fixed capacito...
Canadian deviations
International Standard IEC 60384-14:2013 (fourth edition) forms the basis for CAN/CSA-E60384-14, which
contains the following deviations in addition to those shown in CAN/CSA-E60384-1:14.
[Replace all references to “IEC 60384-1” with “CAN/CSA-E60384-1”]
1 General
1.1 Scope
[Add the following]
This Standard covers the above-noted products that are intended to be…
1 Scope
1.1
This Standard describes zinc-coated steel wire strand suitable for use as guys, suspension strand, span
wires, and overhead ground wire strand. Overhead ground wire strand for electric power transmission is
produced free of wire joints. Included are requirements for Grades 800, 1100, 1300, and 1500 (110, 160,
180, and 220). Zinc coatings for all grades include hot-dip Class A and…
1 Scope
1.1
This Standard applies to portable type gas water heaters (herein after referred to as appliance or water
heater) for use with propane, butane, or liquefied petroleum gases and mixtures thereof having:
a) a regulated pressure;
b) a non-regulated pressure.
1.2
Portable type water heaters and components employing materials or having forms of construction
differing from those…
1 Scope
1.1
This Standard covers the qualification, application, inspection, testing, handling, and storage of materials
required for plant-applied fusion bond epoxy (FBE) coating applied externally to bare steel pipe. The
coated pipe is intended primarily for buried or submerged service for oil or gas pipeline systems.
1.2
This Standard covers the following coating systems:
(a) System 1A…
Field-applied external coatings for steel pipeline systems
1 Scope
1.1
This Standard covers the qualification, application, inspection, testing, handling, and storage of materials required for coatings applied externally to steel piping in the field or a shop. Coated piping addressed by this Standard is intended primarily for buried or submerged service in oil or gas pipeline systems.
1.2
This Standard covers the following coating systems:
a)…
STANDARD FOR ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL
SCOPE
1.1 This Standard covers the design and construction of aboveground steel non-pressure tanks intended
for installation inside or outside buildings and for the storage of:
A Combustible liquid intended to be used as heating fuel and/or generator fuel; and
B Lubricating oil.
NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks…
STANDARD FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
1 SCOPE
1.1 Except as described in Clause 1.7, these minimum requirements cover single and double wall
cylindrical steel, non-pressure tanks of the horizontal type that are used for the underground storage of
flammable liquids and combustible liquids, that are compatible with the material of construction.
1.2 These minimum requirements cover double wall tanks with provision for leak detection…