Rechercher

1 Scope 1.1 This Standard applies to hydromassage bathtub appliances and associated accessories for residential and commercial use that are intended to be permanently connected to a plumbing system and building structure, for use indoors in non-hazardous locations, permanently installed in accordance with the Rules of the Canadian Electrical Code, Part I, and either a) permanently connected…

1.1 The requirements in this standard cover sealed wire connector systems, including insulating caps, covers, resins, tubing, and tapes provided with, or for use with, specific wire connectors. These systems are intended for wet or damp locations, and other installations such as direct burial, below grade, or above grade where protected from direct exposure to sunlight. The wire connectors…

1.1 This Standard applies to exit signs, unit equipment, emergency luminaires, and central power systems intended for connection to circuits with nominal voltages of 600 V and less and providing illumination in the event of a failure of the normal power supply for nonhazardous locations in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard includes…

ISO 9241-392:2015 establishes recommendations for reducing the potential visual discomfort and visual fatigue experienced during viewing of stereoscopic images under defined viewing conditions. Visual fatigue and discomfort might be produced by the stereoscopic optical stimulus of disparate images that were presented binocularly. ISO 9241-392:2015 is also applicable to the final products of…

ISO 2144:2015 describes the determination of the residue on ignition of pulps, papers, and boards. The International Standard is applicable to all types of pulp, paper, and board. The lower limit of the determination is about 0,2 %. NOTE The procedure (Clause 7) requires that at least 10 mg of residue is weighed. The limit stated above corresponds to a 5 g sample. If the sample size is…

ISO 11074:2015 defines a list of terms used in the preparation of the standards in the field of soil quality. The terms are classified under the following main headings: - general terms (terms relating to soil, soil materials, land, and sites); - description of soil (soil characteristics, soil water, properties of soils and substances, processes in soil, contamination, pollution, background…

IEC 60512-1-101:2015 This blank detail (tests and measurements) specification is a supplementary document to the IEC 60512 test and measurements specification series and contains requirements for style, layout and content of test and measurements specifications for connectors. The content of this blank detail (tests and measurements) specification is laid out in two parts: one page contains the…

1.1 This Standard specifies requirements for preventing damage to underground infrastructure. Note: Examples of underground infrastructure include a) oil and gas pipelines; b) electrical and telecommunication cables; and c) water and sewer lines. 1.2 This Standard applies to ground disturbance in proximity to existing, deactivated, abandoned in-place, or reserved for future use underground…

1.1 Scope and references This Standard details mechanical, physical, and electrical requirements for a newly manufactured appliance that dispenses natural gas for vehicles directly into the vehicle natural gas fuel storage system, referred to as a residential fueling appliance (RFA). 1.2 These requirements apply to appliances for: a) natural gas only (see Clause 1.1); b) outdoor or indoor…

This International Standard establishes guiding principles for the development and use of environmental labels and declarations. It is intended that other applicable standards in the ISO 14020 series be used in conjunction with this International Standard. This International Standard is not intended for use as a specification for certification and registration purposes. NOTE Other International…