Rechercher

1 Domaine d'application 1.1 Cette norme s'applique aux disjoncteurs différentiels monophasés et triphasés de classe A conçus pour la protection du personnel, destinés à être utilisés exclusivement dans des systèmes à neutre mis à la terre conformément au National Electrical Code (NEC), ANSI/NFPA 70, au Code canadien de l'électricité (CCÉ), C22.1, ainsi qu'à la Standard for…

ISO 18934:2006 provides suggested guidelines for four storage macroenvironments for archives that contain a variety of recording media, based on the corresponding ISO storage standards for those media. Whenever possible, it is advisable to follow the storage environments in the ISO storage standards. ISO 18934:2006 does not replace these ISO storage standards. In addition to environment…

This CSA Standard is a joint Standard with UL 62, and ANCE NMX-J-436. 1 Scope 1.1 General This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables, rated 600 V maximum, and intended for use in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I and CAN/CSA-C22.2 No. 0, General Requirements - Canadian Electrical Code, Part II, in Canada…

La présente norme CSA est commune avec UL 486C et NXJ-548-ANCE. 1 Domaine d'application 1.1 Cette norme s'applique aux serre-fils et aux connecteurs de câble posés à la main ou à l'aide d'un outil et destinés à tous les conducteurs en alliage de cuivre ou d'aluminium (ou les deux), conformément à la norme canadienne CSA C22.1, Code canadien de l'électricité,…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-4:2004 second edition, 2004-07. 1 Scope This part of IEC 61000-4 relates to the immunity of electrical and electronic equipment to repetitive electrical fast transients. It gives immunity requirements and test procedures related to electrical fast transients/bursts. It additionally defines ranges of test…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-34:2005. 1 Scope This part of IEC 61000 defines the immunity test methods and range of preferred test levels for electrical and electronic equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. This standard applies to electrical and…

ISO 22199:2006 specifies the emission limits and test conditions for lifts, escalators and passenger conveyors, which are permanently installed in buildings and for which ISO/TC 178 has direct responsibility for the production of International Standards, in relation to electromagnetic interference. These limits however, might not provide full protection against disturbances caused to radio and TV…

ISO 22000:2006 specifies the immunity levels that represent essential EMC requirements, and test conditions for lifts, escalators and moving walks that are permanently installed in buildings and for which ISO/TC 178 has direct responsibility for the production of International Standards, in relation to continuous and transient, conducted and radiated disturbances including electrostatic…

ISO 11071-2:2006 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding regional or national deviations): CEN European Standard EN 81-2:1998, Safety rules for the construction and installation of lifts -- Part 2: Hydraulic lifts;ASME A17.1:2004, Safety Code for Elevators and Escalators and CSA B44:2004, Safety Code for…

ISO 21150:2006 gives general guidelines for the detection and identification of the specified microorganism Escherichia coli in cosmetic products. Microorganisms considered as specified in ISO 21150:2006 might differ from country to country according to national practices or regulations. ISO 21150:2006 specifies a method that is based on the detection of Escherichia coli in a non-selective liquid…