1.1
This Standard applies to temperature-indicating and -regulating equipment* for voltages up to and
including 600 V between conductors and intended for general household and industrial use in
nonhazardous locations, in accordance with the Rules of the Canadian Electrical Code, Part I
(CEC, Part I).
* For convenience, the shorter term “equipment” is sometimes used in this Standard.
1.2…
Non-recirculating direct gas-fired industrial air heaters
1.1
This Standard applies to newly produced, direct gas-fired industrial air heaters of the non-recirculating
type, hereinafter referred to as heaters, whose purpose is to offset building heat loss. All air to the
heater is ducted directly from outdoors and the products of combustion generated by the heater are
released into the air stream being heated.
Heaters covered by this Standard are…
Recirculating direct gas-fired industrial air heaters
1.1
This Standard applies to newly produced, recirculating direct gas-fired industrial air heaters (see Clause 3, Definitions), hereinafter referred to as heaters, whose purpose is to offset building heat loss. Ventilation air to the heater is ducted directly from outdoors and the products of combustion generated by the heater are released into the air stream being heated.
Heaters covered by…
Gas clothes dryers, volume I, type 1 clothes dryers
1.1
This Standard applies to newly produced Type 1 clothes dryers (see Clause 3, Definitions), hereinafter referred to as dryers, constructed entirely of new, unused parts and materials:
a)
for use with natural gas;
b)
for use with manufactured gas;
c)
for use with mixed gas;
d)
for use with propane gas;
e)
for use with LP gas-air mixtures; and
f)
for mobile home installation (see Clause 4.1.12…
Liquefied natural gas (LNG) — Production, storage, and handling
1.1
This Standard applies to the
a) design;
b) location;
c) construction;
d) operation; and
e) maintenance
of facilities for the liquefaction of natural gas and facilities for the storage, vaporization, transfer,
handling, and truck transport of LNG. It also contains requirements for the training of personnel.
1.2
For facilities that load or unload LNG from a marine vessel, this Standard contains…
Performance requirements for pressurized flushing devices for plumbing fixtures
1.1
This Standard covers pressurized flushing devices (PFDs) intended to flush water closets, urinals, and other
plumbing fixtures and specifies requirements for materials, design, methods of operation, test methods,
and markings.
1.2
In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy
in order to comply with the standard; “…
1.1 General
This Standard specifies requirements for workplace electrical safety necessary for the practical safeguarding
of workers during activities such as the installation, inspection, operation, maintenance, and demolition of
electric conductors and electric equipment, as well as work in proximity of energized electrical equipment.
1.2 Application
While it can be applied by…
1.1
This Standard applies to newly produced, direct gas-fired process air heaters of the recirculating or nonrecirculating
type (see Clause 3, Definitions), hereinafter referred to as heaters, whose primary purpose
is to provide process heating to non-occupied spaces within commercial and industrial buildings and
may also include operation as a non-recirculating ventilation air heater (see Clause…
Sustainability Standard for household cooking appliances
1.1
This Standard covers the following products:
(a) built-in cook tops:
(i) electric powered:
(1) radiant;
(2) halogen;
(3) coil;
(4) induction; and
(5) grill; and
(ii) gas powered:
(1) sealed burner; and
(2) open burner; and
(b) built-in ovens:
(i) electric powered:
(1) single cavity; and
(2) multiple cavity; and
(ii) gas powered:
(1) single cavity; and
(2) multiple cavity;…
1.1
This Standard specifies minimum requirements for the design, construction, installation, and operation of lifts that are to be specifically used by persons with physical disabilities travelling between fixed points of a building or structure, including a private residence, with a view to safeguarding against risk of accidents associated with the operation of such equipment.
1.2
This…