Rechercher

Specifies a test method for applying a simulated solar load in the laboratory and determining the radiant heat energy by artificial light source or a natural solar load which affects an operator enclosure of an earth-moving machine. Allows the radiant energy affecting an operator enclosure to be determined during the tests specified in ISO 10263-4.

Gives a classification of containment enclosures according to leak tightness and specifies methods for checking this tightness for the following tests: manufacturing test at the factory; acceptance test at the laboratory; test before commissioning; periodical tests during operation.

Cancels and replaces the first edition (1985). Specifies two methods for the determination of the flat crush resistance of corrugating medium after laboratory fluting. The procedures are applicable to any paper intended to be used, after fluting, in the manufacture of corrugated fibreboard.

Specifies the performance of a universal chassis dynamometer bench and a simplified bench, with a single roller, for laboratory tests on mopeds and motorcycles. Also gives the design characteristics of a bench. The bench is used to check exhaust gas emissions.

Deals with methods for generating radiation beams with radiation conditions which can be used under test conditions typically found in test laboratories or in manufacturing facilities for the determination of characteristics of medical diagnostic X-ray equipment.

Specifies methods for exposing specimens to different types of fluorescent UV lamp.

Provides guidance on the selection and conduct of appropriate test methods for the determination of biodegradation of organic chemicals in aerobic soils. Does not describe any specific test method.

Lays down the principles for the design of the apparatus and minimum requirement that shall be met for determination of the laboratory steady-state thermal transmission properties of building components and similar components for industrial use. Does not specify a particular design. Describes also the apparatus, measurement technique and necessary data reporting. Primarily intended for laboratory…

This National Standard of Canada is equivalent to International Standard ISO 2157:1992. 1 Scope This International Standard specifies the nominal diameters of the working parts of dental rotary instruments, for example burs, laboratory burs, grinding instruments, diamond instruments, mandrels, etc. and the corresponding designation. It does not cover the diameters of root canal…