Rechercher

CAN/CSA-A3001-03 Cementitious Materials for Use in Concrete 1 Scope 1.1 This Standard addresses the following aspects of various cementitious materials: a) their definitions; b) their chemical, physical, and uniformity requirements; c) the tests required; d) the procedures for inspection and sampling; and e) the units of measurement, packaging, marking, and storage. 1.2 The various…

ISO 23794:2003 provides guidance on the determination of the abrasion resistance of vulcanized and thermoplastic rubbers. It covers both solid and loose abrasives. The guidelines given in ISO 23794:2003 are intended to assist in the selection of an appropriate test method and appropriate test conditions for evaluating a material and assessing its suitability for a product subject to abrasion.…

ISO 7206-10:2003 applies to femoral heads of partial or total hip-joint replacements of modular construction (i.e. a head/neck conical taper connection) and describes methods of determining the load required, under specified laboratory conditions, to cause failure of the head (disassembly or fracture). It applies to components made of metallic and non-metallic materials. ISO 7206-10:2003 does not…

This technical report gives guidance on the treatment of uncertainties to those who are involved in the development or modification of CISPR electromagnetic compatibility (EMC) standards. In addition, this part provides useful background information for those who apply the standards and the uncertainty aspects in practice. The objectives of this technical report are: a) to identify the…

ISO 16701:2003 defines an accelerated corrosion test method to be used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or road de-icing salt. ISO 16701:2003 specifies the test apparatus and test procedure to be used in conducting the accelerated corrosion test to simulate, in a…

ISO 18653:2003 specifies methods for the evaluation of measuring instruments used for gear measurements of involute, helix, pitch and runout. It is applicable both to instruments that measure runout directly and to those that compute it from index measurements. It also gives recommendations for the evaluation of tooth thickness measuring instruments and, of necessity, includes the estimation of…

ISO 20340:2003 deals with the performance requirements for the protection, by protective paint systems, of new offshore and related structures exposed to the offshore atmosphere, as well as those immersed in sea or brackish water. ISO 20340 can also be used for other structures, provided that the selected paints or protective paint systems comply with this International Standard. This…

ISO 15190:2003 specifies requirements for safe practices in the medical laboratory.

ISO 15839:2003 describes the performance testing of on-line sensors/analysing equipment for water. The standard is applicable to most sensors/analysing equipment, but it is recognized that, for some sensors/analysing equipment, certain performance tests cannot be carried out. This International Standard defines an on-line sensor/analysing equipment for water quality measurements;defines…

ISO 15195:2003 gives the specific requirements for reference measurement laboratories in laboratory medicine. Examinations of properties with results reported on a nominal or ordinal scale are not included. ISO 15195:2003 is not applicable to routine medical laboratories. The general requirements for the competence of calibration laboratories are laid down in ISO/IEC 17025 for testing and…