Rechercher

IEC 61883-5:2004 specifies the packet format and the transmission timing for SDL-DVCR data. It describes the specifications for the IEEE 1394 packet, the CIP header for SDL525-60 and SDL625-50 systems, and the transmission timing.

ISO 140-14:2004 concerns field measurements of airborne sound insulation and impact sound insulation, and is to be used as a supplement to ISO 140-4 and ISO 140-7. It contains guidelines on sound insulation measurements in special situations in the field not directly covered by ISO 140-4 and ISO 140-7. The basic standards ISO 140-4 and ISO 140-7 specify the measurement procedure in detail under…

ISO 17642-1:2004 describes the fundamentals of cold crack formation and the principles of cold cracking tests. These tests can be used to determine the cold cracking sensitivity of welding consumables, parent materials and weld metal. The most common tests are described. In addition, an overview is given of the cold cracking test procedures.

This International Standard specifies the test method and guidelines for evaluating the quality and reliability of boards, solder lands, solder process and solder joints of reflow solder mounted area array type packages and peripheral terminal type packages. This standard tests for durability against mechanical and thermal stress received during or after the mounting process of discrete…

This International Standard specifies the test method and guidelines for evaluating the quality and reliability of boards, solder lands, solder process and solder joints of reflow solder mounted area array type packages and peripheral terminal type packages. This standard tests for durability against mechanical and thermal stress received during or after the mounting process of discrete…

ISO 17633:2004 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as welded or heat treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting…

ISO/IEC TR 15446:2004 provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with ISO/IEC 15408 (the "Common Criteria"). ISO/IEC TR 15446:2004 gives suggestions on how to develop each section of a PP or ST. It is supported by an annex that contains generic examples of each type of PP and ST component, and…

ISO/IEC TR 15446:2004 provides guidance relating to the construction of Protection Profiles (PPs) and Security Targets (STs) that are intended to be compliant with ISO/IEC 15408 (the "Common Criteria"). ISO/IEC TR 15446:2004 gives suggestions on how to develop each section of a PP or ST. It is supported by an annex that contains generic examples of each type of PP and ST component, and…

1. SCOPE 1.1 This test method determines combustibility parameters for the assessment of degree of combustibility of building materials by measuring the heat release and smoke production from specimens exposed to radiant heat using the test apparatus, specimen configurations and procedures described. 1.2 This test method determines the amount of heat and smoke that may be contributed to…