Rechercher

1.1 This standard applies to reinforced liquid asphaltic materials in the form of aqueous emulsions of the mineral colloid type for use as sprayed, trowelled or brushed-on coatings for built-up roofs and other roof surfaces, and for waterproofing concrete or masonry surfaces. 1.2 For more detailed information on intended uses and methods of application see par. 7.2 and 7.3.

This National Standard of Canada is equivalent to International Standards ISO 8879-1986 and ISO 9069-1988. 1 Scope This International Standard: (a) Specifies an abstract syntax known as the Standard Generalized Markup Language (SGML). The language expresses the description of a document's structure and other attributes, as well as other information that makes the markup…

These requirements cover the design and construction of Type L Vents which are intended for the venting of flue gases having temperatures not exceeding 300 degrees C, from fuel-burning appliances certified for use with Type L Vents. They may also be used where Type B gas vents are used. They are intended for installation in buildings to provide an essentially vertical conduit or passageway for…

This standard is applicable both to capacitor units and capacitor banks intended to be used for power-factor correction of a.c. power systems having a rated voltage up to and including 660 V and frequencies 15 Hz to 60 Hz. Supersedes IEC 70.

1. SCOPE 1.1 This Standard applies to household and commercial (hairstyling salon) electrical hairdressing equipment of the portable, pedestal, and table-mounted types, including hair dryers, hair steamers, combs, curlers, and the attachments with which they are sold, rated at 250 V and less, designed for use in nonhazardous locations in accordance with the Rules of the Canadian Electrical…

1. Scope This Standard applies to Types USEI 90 and USEB 90 service-entrance cables intended for underground installations on systems (a) having a nominal voltage rating of 600 V and less; (b) having a maximum allowable conductor temperature of 90°C; and (c) in accordance with the Rules of the Canadian Electrical Code, Part I.

1. Scope 1.1 This Standard applies to the following products intended for use in accordance with the Rules of the Canadian Electrical Code, Part I: (a) metal and nonmetallic cutout boxes; (b) metal and nonmetallic junction boxes (of other than the swimming pool type), and pull boxes where the length does not exceed three times the width and the volume exceeds 1640 mL. 1.2 This Standard…

1. Scope 1.1 This Standard provides a method of presenting technical information relating to the selection of storage batteries for photovoltaic systems and to the precision of that information. Note: A distinguishing feature of photovoltaic (PV) power systems is the unpredictability and limitation on the amount of charging power available and hence on the charge- discharge cycles…

This National Standard of Canada is identical in content and in layout with International Standard ISO 8825-1987, Information processing systems - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstract Syntax Notation One (ASN.1). It specifies a set of basic encoding rules that may be used to derive the specification of a transfer syntax for values of types defined…

This standard applies to brass or brass plated, roundhead, prong type paper fasteners and washers, used to hold sheets of paper together, and for use with file folders.